Don't know. Not sure that I really care, as these stones definitely did the job that was asked of them, and did it with ease, even for a beginner whetstone user. I'll probably stick with them, at least until I get a lot more experience. Though, I do see a 10,000 or higher grit stone in my immediate future - more to play around with, than a feeling of genuine need.
When the stone is intended for use on a flat surface, it is called a Bench Stone. On the other hand, small, portable, hand-held stones are referred to as Pocket Stones. Also, because Pocket Stones are smaller than Bench Stones, they are more easily transported but, they also present difficulty in maintaining a consistent angle and even pressure when attempting to sharpen longer blades. Consequently, Bench Stones are commonly used at home or in camp whereas, Pocket Stones are generally reserved for honing an edge in the field.
Everten is Australia's leading online kitchenware retailer. A passionate Australian family business, we pride ourselves on having the best range available, stocking over 10000 products from the world's leading brands matched with the best service. As the very first online kitchenware retailer to become a Google Trusted Store in Australia, you know that you can trust us to deliver quality kitchenware at unbeatable prices with full product warranties to your door for just a flat rate of $8.90 anywhere in Australia. Read more about us
There will be a drawer that extends into the mechanism under the abrasives. Any detritus from the sharpening process drops into this drawer. Exactly where the drawer is located will differ from sharpener to sharpener but it shouldn’t be hard to find. Remove the drawer flick any material into the wastebasket and then wipe out the drawer with a damp cloth or tissue. You may want to use work gloves and goggles to protect your hands and eyes from any loose metal shavings. Once the drawer is clean and dry replace it. The exact means by which the sharpening mechanism itself is cleaned will vary from manufacturer to manufacturer. Consult your owners guide for specific details. Make sure you don’t introduce any grease or other lubricants into the sharpener unless specifically directed to do so by the owner’s manual. Also, the outside of the sharpener should come perfectly clean with just a damp cloth. Avoid using commercial cleaners or abrasives of any kind.
The Chef’s Choice 316 sharpener will restore your dull knives to professional sharpness. It’s a great, reliable, well-built kitchen appliance that requires no special knowledge or setup. The precision guides of the 2-stage system make sure the blade is firmly held at the correct angle so that optimal sharpening is realized with minimal fuss. Great for your Asian-style knives or those you’d like to endow with an Asian-type edge for some precision cutting.
This wedge ends up short of a "point" to a much larger degree than the picture would indicate. The metal stops short, but then there is black non-slide "tape" applied to one side, and white "slide" tape applied to the other side, which makes the wedge even thicker than it appears in the photo, which means that in practice the end of wedge is even more truncated. So I have a hard time supporting my knives accurately on this wedge while sliding them down into contact with my stones. Prior to buying this wedge I just used a wooden wedge I cut off of a 3" by 3" post using a miter saw, said wedgewhich has a much less truncated end. That wooden wedge unfortunately absorbs water from my Japanese Waterstones. But I will try spraying polyurethane on that wooden wedge to help waterproof itand try again. If that doesn't work I will try to find a 3" by 3" plastic trim board somewhere and cut a wedge off the end of that. Note that you can buy 20 degree plastic wedges, but this is the first one I have found that does 15 degrees (nominal.) Note that Amazon also has the Blue AngleGuide set of wedges, but they are very small https://www.amazon.com/Angle-Guides-Sharpening-Knife-Stone/dp/B01N4QMO7U/ref=sr_1_4?ie=UTF8&qid=1499301705&sr=8-4&keywords=sharpening+angle+guide
Just to prove that we're not merely sharpening geeks, here's an interesting side note. The word whet pops up in some unexpected places. A small species of owl is called the saw-whet owl because the sound it makes reminded people of the sound made when sharpening a saw with a file. And the phrase "to whet your appetite" comes from the idea of your hunger growing sharper at the thought of food.
using an appropriate blade for the task – a thinner blade for more delicate work, and a thicker blade whenever a thinner blade is not required (e.g. a thinner blade might be used to cut fillets, butterfly steak or roast for stuffing, or perform Mukimono, while a thicker one might be used to slice or chop repeatedly, separate primal cuts of poultry or small game, or scrape and trim fat from meat or hide, as these actions would be more likely to cause unnecessary wear on a thinner blade.)
The final Chef’s Choice sharpener on our list is the 316 Diamond Sharpener. Like the 15XV the 316 is at its best when used to sharpen Asian-style knives and it does so with unflinching effectiveness and speed. This is a compact, 2-stage electric sharpener that produces the 15 degree edge so favored in Asian cutlery. Ideal for the preparation of sashimi or sushi.
In most cases, the sharper, the better. The sharpness of your edge is determined by the angle (the lower the angle, the sharper the edge) and how fine of a grit you choose for your final honing. Since you have already determined your angle many steps earlier, now you just need to know which grit you can stop at. This again depends on the use of the knife. In most cases, go all the way to the finest stone that you own as this will give you your best edge. The only exception would be a knife used to cut soft vegetables like tomatoes, as a slightly more coarse edge will provide more of a tooth pattern for easier cutting.
The Whetstone 2-Sided Sharpening Stone is made from professional grade corundum and will sharpen everything from a razor blade to a cleaver and even a machete, should you happen to have a machete lying about that needs sharpening. This is the simplest type of sharpener it’s true but the company have obviously put a great deal of thought into the product.
I'm a novice knife sharpener. I've had to unlearn what my grandpa taught me in order to use these. So far, I've had decent but mixed results. I've switched to my cheap 200/400-ish cheap tool stone from harbor freight for cutting a bevel when the blade has either been damaged or did not have a proper bevel. The 400/1000 grit stone in this kit is soft. Very soft. I have bowled it out several times. It makes keeping a steady angle difficult. But these stones at this price point are meant for learning, and for that they serve their purpose.
Heres why I wasn't impressed at first. I only used it for a few minutes on each side, which resulted in nothing. I watched a video online with a master chef using his stone, and he sharpened his knife for 10 minutes on each stone before moving up to a finer grit. I took this hint, and used sharpened my knife on each side of this stone for 10 minutes, which led to perfection.
Once sufficiently wet, it's time to position the stone on something solid, so it doesn't move about during sharpening. Many come with holders, but you can just place it on a slightly damp tea towel on the table. The stone should be roughly perpendicular to your body, though Warner told me it is sometimes easier to angle it ever so slightly to the right (if you're right handed).
Aluminum-Oxide oil stones are very popular man-made sharpening stones produced by an abrasives company called Norton and which are commonly called India Stones. Generally less expensive than Arkansas stones (aka Novaculite), these stones are graded coarse, medium, and fine and are designed for fast cutting. Yet, when the fine grit is used, they can also produce a relatively fine edge. Also, because India Oil Stones are both softer and coarser than Arkansas Stones, they are commonly used in conjunction with Novaculite to cut the initial edge bevels or, repair extremely dull or damaged edges before refining and polishing the bevel with an Arkansas Stone.
Technically, the name whetstone can be applied to any form of sharpening stone, regardless of what cutting fluid is typically used with it. However because whet sounds like wet, many hear the word and assume that it refers to a stone that is used wet with water. Actually, water stones, oil stones diamond stones and ceramic stones are all forms of whetstones. So, while all water stones are whetstones, not all whetstones are water stones.
At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.
The type and size of the blade being sharpened determines the size of the stone needed. In general , a 6" stone is considered a small sharpening stone, an 8" stone is a common larger size, and a stone larger than 8" (10"-12" are available) is considered generously sized. Stones smaller than 6" (3" and 4" stones are quite common), are considered pocket stones and can be used for toolboxes, tackle boxes and on-the-go sharpening, but are generally not recommended for regular sharpening jobs.
Basically, there are 3 types of whetstones, Arato (rough grits), Nakato (medium grits) and Shiageto (fine grits). We normally use Nakato for the sharpening, but you can start with Arato to correct rough or damaged edge, and then Nakato and finish with Shiageto to get a fine and keen edge. All the sharpening methods and processes are same. However, it is not recommended to sharpen the opposite flat side of the blade with Arato
I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:
If no metal is being removed from the edge of the blade, it’s considered honing. Whereas if metal is being removed from the blade edge this is considered sharpening. Certainly, even honing will result in some microscopic amounts of metal being removed from the blade edge but not enough to be visible to the human eye, so the above definition is basically a solid one.
A: Experienced professionals know exactly how sharp they want their knives to be and have an instinctive feel for when they’re just right and when they’re even a tiny bit off. Most folks, however, need to have some sort of objective test they can use to determine if in fact their best knife has been properly sharpened. There are a few simple ones you can use:
The following are my personal favourites and they are all synthetic stones, I do have experience with natural what stones but lets keep it simple, lets stick to synthetic water stones. Believe me, some of the world sharpest knives are sharpened solely on synthetic stones. Here are my personal favourites, I use these water stones every day and the order is not necessarily in priority, they are all good.
When the block is intended for installation on a bench it is called a bench stone. Small, portable stones (commonly made of bonded abrasive) are called pocket stones. Being smaller, they are more portable than bench stones but present difficulty in maintaining a consistent angle and pressure when drawing the stone along larger blades. However, they still can form a good edge. Frequently, fine grained pocket stones are used for honing, especially "in the field". Despite being a homophone with wet in most dialects of modern English, whetstones do not need to be lubricated with oil or water, although it is very common to do so. Lubrication aids the cutting action and carries swarf away.