The speed and polishing ability of waterstones attract many sharpeners. Waterstones sharpen quickly and are available in fine polishing grits not found in other stone types. The ability to flatten the stones is a necessity when sharpening with waterstones, so a starting set should include a flattening stone of some kind. Our article, How to Flatten a Waterstone, has more information about keeping waterstones flat.
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.
The AccuSharp Sharpener is proof positive that you shouldn’t judge a book by its cover. While it looks like something used to attach buttons to shirts it’s actually one of the most cost effective, and we mean effective, means around for restoring a professional edge to your dull knives. It’s compact, screwed together rather than glued and its diamond coated tungsten carbide wheels create an edge that will last.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
For this type of hand held manual sharpener the 463 does an extraordinary job thanks mostly to the diamond abrasive wheels. You get an edge that’s both razor sharp and burr-free, as if you spent an hour working the edge on an oil stone. If people make a mistake with the 463 it’s that they assume more pressure is needed than actually is. Keep in mind though that it really shines on serrated and straight edged, double bevel Asian-style knives.
Whetstones may be natural or artificial stones. Artificial stones usually come in the form of a bonded abrasive composed of a ceramic such as silicon carbide (carborundum) or of aluminium oxide (corundum). Bonded abrasives provide a faster cutting action than natural stones. They are commonly available as a double-sided block with a coarse grit on one side and a fine grit on the other enabling one stone to satisfy the basic requirements of sharpening. Some shapes are designed for specific purposes such as sharpening scythes, drills or serrations.