As opposed to water whetstones that require you to pre-soak the stone, the Norton oil stone is pre-filled with oil to save time and eliminate the need to pre-soak it prior to use and the lubricant stays on the surface during sharpening. The oil also prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips.
The type and size of the blade being sharpened determines the size of the stone needed. In general , a 6" stone is considered a small sharpening stone, an 8" stone is a common larger size, and a stone larger than 8" (10"-12" are available) is considered generously sized. Stones smaller than 6" (3" and 4" stones are quite common), are considered pocket stones and can be used for toolboxes, tackle boxes and on-the-go sharpening, but are generally not recommended for regular sharpening jobs.
To summarize, Shapton Glass 500, 1,000 and 2,000 is a good combination and if you would like to throw in the 4,000 grit stone in lieu of the 2,000 that is good as well. If your knives are very hard, ZDP 189 for example, this is a fantastic choice. (They are also excellent for tools, chisels etc. and they are the premier choice for many Straight Razor honers).
Scissors get dull, too, but many sharpeners can’t handle their unique shape. This easy-to-use manual sharpener can handle scissor easily, and will also sharpen all of your non-serrated knives with ease. It’s ergonomically designed for either right- or left-hand use and has a protective finger guard so you can safely sharpen all the knives in the block.
I bought this knife sharpener for my son as a Christmas present years ago and recently (but cautiously) used it on my cutlery (Henkel and Wusthof). Frankly, I had been a little lazy and let my knifes lose a bit of their edge. I did not feel like getting out my stones and oil to do a proper job, so I borrowed my son's sharpener. It really works great, which I hate to admit, as it feels like a cheat and it is a fraction of what I spent on stones. I realize that I need to buy one for myself, so I looked around to see if there is anything better and I could not see anything that looked better. This one is adjustable, which is what I need. I looked at the 1 star ratings and there was a common theme that the knife edge chatters as the blade is pulled across. It can, if you don't use it properly! If your blade is very dull, you will need to pull with a very light, steady, and quick motion. You never need to push down hard as you pull. Even pressure. Don't be a brute! Finesse is what is needed. I am going to buy another one for me.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article.
I have this one and the axe/machete version as well. These are great sharpeners that make very short work of getting blades sharp. They take off quite a lot of material and are quite different than most other stone sharpeners I have used in the past, so I try to be conservative with my pressure as you see the chips fall when you pull the knife through. But, they absolutely work, and work very well. If you have a high use knife, this is a great way to keep it sharp and in service all the time. I use my large bushcraft knife a lot more now that I have this since I can sharpen it much faster and easier. I would not use this sharpener on precision instruments just because I prefer more control and try to preserve material on those types on knives. But, bottom line, I get more work done and much faster now that I have this.
With its premium series Select II, the whetstone manufacturer Sigma Power Corporation from Tokyo addresses users of high-alloy steels such as HSS. These stones, too, are obviously intended to engender a grinding experience similar to that of natural stones. The special production process is expensive, but the Sigma Select II probably has no equal when it comes to demolishing steel.
These are very popular stones. 8" Dia-Sharps have a single grit per stone making them more expensive, but at 8" by 3" they are wider than the 8" DuoSharps, offering a good working surface. The 8" Dia-Sharp line also has the widest range of grits available from DMT, with extra extra coarse, medium extra fine and extra extra fine options not available in other sizes, so it is good line to consider. One coarse and one fine stone is a good starting point.
Stropping a knife is a finishing step. This is often done with a leather strap, either clean or impregnated with abrasive compounds (e.g. chromium(III) oxide or diamond), but can be done on paper, cardstock, cloth, or even bare skin in a pinch. It removes little or no metal material, but produces a very sharp edge by either straightening or very slightly reshaping the edge. Stropping may bring a somewhat sharp blade to "like new" condition.
You want sharpening stones that will be useful for the majority of your edges now, and that will remain useful as you expand both your tools and your sharpening toolkit in the future. Ending up with duplicate stones or ones that are no longer useful as you gain new knives or tools is a waste of money. The goal is to start with something that will stay with you as your needs develop.
Aesthetics – While it’s true that most people keep their sharpener, (even their expensive mechanical sharpeners) in the drawer until it’s time to use them you’ll still want to be aware of whether your sharpener fits into the overall aesthetic of your kitchen when you do take it out to use. While sharpener designs are fairly limited to be sure you typically have some control over the color and finish of the device as well as design factors like whether the device is boxy or rounded in appearance. With a stone sharpener or a stick however you pretty much get what you get.
A steel is the shorthand term for a steel rod used to straighten knife edges. Any decent knife set includes one, but few people know exactly what it does, much less how to properly use it. If you don’t have a steel, go buy one for about $20. Joe will show you how to use it to maintain a sharp edge. Don’t waste your money getting a diamond-coated surface. You don’t need it to know how to sharpen a knife.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.