At this point, I can flip the stone over and use the fine course side. Most Whetstones come with a nice wooden base that do a good job to hold the stone in place while sharpening. Before starting, you might need to add a bit more water to the surface. Now with the fine course stone, finish the sharpening process like before at the same blade angle and nice consistent passes along the stone. About 10 to 12 passes is good before switching to the other side of the blade. At this point, the blade should be extremely sharp. I’ll just give a quick paper test here. I can now slice paper quite easily with my knife.
You've acquired a good chef's knife, you're using it almost daily to make tasty dinners for the family, and it's stored in a nice knife rack or a magnet for safekeeping. So why stop there? Keeping that knife's edge fine will make cooking not only safer but, let's face it, much more fun. Whether you've spent £150 on a high-end knife or under a tenner on a dinky paring knife, keeping it sharp is crucial. 
Just to prove that we're not merely sharpening geeks, here's an interesting side note. The word whet pops up in some unexpected places. A small species of owl is called the saw-whet owl because the sound it makes reminded people of the sound made when sharpening a saw with a file. And the phrase "to whet your appetite" comes from the idea of your hunger growing sharper at the thought of food.
I know that it is very helpful to watch a video of this process and the best videos of knife sharpening I have seen are out there for you. If you only watch one person sharpen a knife, watch Jon Broida from Japanese Knife Imports. Extremely professional videos and easy to understand. I have a couple of videos as well on my website but I really like what Jon has done for the sharpening community.
Be careful: Don’t move your fingers laterally along the edge, you’ll cut yourself. Feel for a rough area running from tip to heel. Again, it takes time to know what to expect because the best burr will be subtle. Just know that the bigger the burr, the more metal you are removing—more than necessary. Don’t worry, you won’t ruin the knife doing this. You’re learning here, and mistakes are part of the sharpening journey. Learn from them.
Clamp-style sharpening tools use a clamp with several holes with predefined angles. The stone is mounted on a rod and is pulled through these holes, so that the angle remains consistent. Another system is the crock stick setup, where two sticks are put into a plastic or wooden base to form a V shape. When the knife is pulled up the V, the angle is held so long as the blade is held perpendicular to the base. Several cutlery manufacturers now offer electric knife sharpeners with multiple stages with at least one grinding stage. These electric sharpeners are typically used in the kitchen but have the ability to sharpen blades such as pocket or tactical knives. The main benefit of using an electric sharpener is speed with many models that can complete the sharpening process in one to two minutes. The disadvantage is that the sharpening angle is fixed so some specialized knives, like a Japanese style Santoku, may need additional attention to sharpen to the ideal angle.
Unfortunately, the arrays of modern whetstone can be bewildering to the inexperienced sharpeners that so often times many of them end up with a crap or wrong decision on stone type for their utensils. The most difficult to determine is whether the whetstone is fake or fabricated with low quality of materials. To avoid this you can only go for the reliable brand of a whetstone.
Honing is kind of like dusting the furniture while sharpening is more like reupholstering the furniture. Honing is purely a maintenance activity that should be regularly practiced to make sure the blade is clean and sharp as can be every time you use it. It’s easily done using a honing rod, a leather strop or a sharpening stone; as most stones have a side for sharpening and a side for honing. Honing is akin to trimming your hair to remove the split ends. It’s not a full on haircut. What it does is realign the tiny sharp protrusions along the edge of the blade that can be bent over with use, so that they stand more or less straight.
The whetstone is the most popular for sharpening pocket knives (or knives). But, before  you go into the sharpening, you must prepare the whetstone beforehand.  Don't worry, it's quite easy. The majority used can be done by dipping the stone in water for about 15 minutes. Regardless of what type of whetstone you use, never use it while it's dry. It's important for a clean sharpening. Using mineral oil is another way to prepare a whetstone. It'll absorb into it once you begin putting the right amount on the surface. How you will determine how much to put is to ensure a "thick film" is lathered across the entire surface. This is critical when you learn how to sharpen a pocket knife.
Hold the knife in your right hand (or left) with your index finger along the spine of the knife and be comfortable, hold it tight enough so it doesn’t move as you sharpen but you don’t need a death grip on it. Wear shoes and if possible stand on a mat that will absorb the impact of the knife if you drop it. (You won’t drop it but be safe…..move your feet if you drop it!).
The answer to the question of how to choose a single whetstone from among the many is actually one of both purpose and expense. Indeed, as the old adage says: “You get what you pay for” – This is certainly the case with sharpening stones. In fact, as a general rule, a high quality, natural, whetstone is significantly more expensive than a man-made whetstone but, they also tend to produce a noticeably finer edge than man-made stones do. On the other hand, man-made whetstones (with the exception of diamond hones) are very affordable and, just like natural whetstones, they too are available in different grits for different stages in the sharpening process from cutting the initial edge bevel to polishing a finely honed edge.

Don't know. Not sure that I really care, as these stones definitely did the job that was asked of them, and did it with ease, even for a beginner whetstone user. I'll probably stick with them, at least until I get a lot more experience. Though, I do see a 10,000 or higher grit stone in my immediate future - more to play around with, than a feeling of genuine need.

You may be utilized that one additionally dried out without having water or even essential oil making all of them simple to use whenever within the area. It may be cleaned out along with cleaning soap along with a typical kitchen area container scrubber. The actual quality grits depart the refined, really the razor-sharp advantage. However usually that one obtainable quality grids just.
You might not need to spend hundreds of pounds to get the best knife sharpener, but you do need to know what you're doing. Warner gave me a crash course in the technique. As a newbie to this method, it took a while to get used to (especially since Warner handed me a knife that had never previously been sharpened) but after half an hour's practice and a little encouragement, I got the hang of it. Here's what I learned...

So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.
When starting out sharpening, it won’t be long before you hear about the “toothy” vs “polished” edge. It will suffice to know that a 1k stone is going to give you an edge that will perform beautifully as will a knife finished at 5k. There is a belief that a knife that has a highly polished finish, 5k and up will be so polished that it’s toothy goodness will be erased. This knife will not bite into the skin of a tomato for example because the edge is too polished, it will slide over the top. This is not always true, if the knife has been sharpened well, i.e. if Side A and Side B of the blade meet precisely at the Apex of the knife, that edge will slide into a tomato quite beautifully. I have seen many brand new Japanese knives with highly polished 8k edges that no tomato skin can stand up to.
Ceramic sharpening stones were the early replacement for natural stones. Unfortunately there are huge differences in the quality of ceramic stones so be wary. Some are extremely soft and dish out very quickly and at the other end of the spectrum some are so hard they tend to glaze over in a hurry. Ceramic stones need a good soaking for about 10 or more minutes to saturate the pores of the stone prior to use. As all knife steels are different we tend to find that ceramic stones tend to work better with some knives over others. There are no hard and fast rules but we like ceramic for Ao-ko and single edged knives. The Kaiden Ceramic stones are the fastest cutting Japanese stones in Australia and are recommended for advanced users.
I really liked this whetstone! I had a Smith's pocket sharpener that could get my knife sharp enough for working around in the yard (I have an Opinel no.8). However, in doing a little research I found that the sharpener was only around 600 grit on the finest setting. So this BearMoo 1000/4000 grit looked like the perfect step up, and it turned out to be the perfect stone for me. The pictures are an accurate representation of what you get. The removable rubber base was helpful when switching from one side to the next, and it kept the stone from sliding around. The instructions say that the stone can work with either water or oil, but that water is preferred. It said to leave the stone soaking in water for five minutes, and the stone worked like a champ. I especially liked how the instructions gave you an approximate time of how long the stone takes to sharpen a knife -- it just helped give me an idea that it would take about 15-20 minutes on the 1000 grit side, and then another 10-15 minutes on the 4000 grit. Just turn on a TV show!

The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.