Our second entry from Chef’s Choice is the 463 Pronto Santoku. This manual sharpener is super-simple to use and delivers fast, high quality results every time. While this is a “2-stage” system there’s nothing complicated about it. One slot is for sharpening and the other for honing. Both stages utilize diamond abrasive surfaces so your blades will retain its edge for a good long time.
However, because the Belgian Blue stone generally occurs in relatively wide columns with much thinner layers of Vielsalm Coticule on either side adjacent to the slate, the Belgian Blue stone is more plentiful that Coticule and thus, it’s somewhat less expensive. But, it’s also somewhat softer than Coticule and is not divided into different grades as Coticule is. Furthermore, because it is a softer stone than Coticule, it is sold without a substrate layer.
The 8,000 grit Kitayama is definitely a popular 8K stone, it is my favourite, and the feedback has much to do with that. It is silky smooth and feels creamy when you use it. When reaching refinement levels of 6k and above, polished bevels/edge are inevitable, and often sought after. The level of polish from this particular stone is very beautiful, assuming that you have done some refinement prior to this but it is a wonderful 8,000 grit stone.
first time buying a sharping stone. i bought this because i wanted to sharpen kitchen knives. you have to practice to get good at it, use a knife you don't care about because you might mess it up. there is some conflicting instructions online on how to use, water or no water. read as much as you can about using stones and practice, practice , practice. look up videos on youtube and internet. i had fun using it, BUY IF YOU WANT TO LEARN here is some stuff i found, they all sound like professionals http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 http://culinaryarts.about.com/od/knivescutlery/ht/whetstone.htm this is a video that says don't use water http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 this is a youtube video that i watched that uses water. *informative http://www.youtube.com/watch?v=KFIg9Cm-nJg
One of the most well-regarded natural whetstones is the yellow-gray "Belgian Coticule", which has been legendary for the edge it can give to blades since Roman times, and has been quarried for centuries from the Ardennes. The slightly coarser and more plentiful "Belgian Blue" whetstone is found naturally with the yellow coticule in adjacent strata; hence two-sided whetstones are available, with a naturally occurring seam between the yellow and blue layers. These are highly prized for their natural elegance and beauty, and for providing both a fast-cutting surface for establishing a bevel and a finer surface for refining it. This stone is considered one of the finest for sharpening straight razors.
A: People often make the mistake of assuming that just because a mechanical knife sharpener will sharpen the edge of a knife that means it will sharpen any type of cutting edge, including scissors. This is a mistake and can wind up being a costly mistake when you have to replace both your scissors and the knife sharpener. There are sharpening devices specifically designed to handle scissors. Or you can bring your scissors to a sharpening pro who will usually have the right equipment on hand to also sharpen scissors. Another thing to keep in mind about trying to use a sharpener to sharpen scissors is that by using the device in this fashion you are likely voiding the warranty. As such if you damage the device trying to sharpen scissors you’ll need to pay to have it repaired or replaced as the warranty won’t cover it. Also, certain types of high end scissors also come with a warranty. And, just as with the sharpener itself, if you try to sharpen them using a mechanical sharpener you can say goodbye to the warranty protection. The bottom line is to always use the appropriate tool for the job at hand. That way you’re assured of the best possible result and any warranty remains in effect.
Ceramic sharpening stones were the early replacement for natural stones. Unfortunately there are huge differences in the quality of ceramic stones so be wary. Some are extremely soft and dish out very quickly and at the other end of the spectrum some are so hard they tend to glaze over in a hurry. Ceramic stones need a good soaking for about 10 or more minutes to saturate the pores of the stone prior to use. As all knife steels are different we tend to find that ceramic stones tend to work better with some knives over others. There are no hard and fast rules but we like ceramic for Ao-ko and single edged knives. The Kaiden Ceramic stones are the fastest cutting Japanese stones in Australia and are recommended for advanced users.
Japanese water stones – both natural and synthetic – are known for their superior sharpening performance, not only for Japanese tools, but also on their Western equivalents. The loosely bonded abrasive grit is washed out very quickly, as it blunts during the sharpening process; this exposes new, sharp, particles that can get to work on the blade. Water stones are lubricated only with water! Never use oil!
As you probably have guessed, knives are easier to sharpen on longer stones. The width of the stone is less important than the length when sharpening knives. The longer stone allows for longer sharpening strokes and contributes to faster sharpening. The longer strokes mean fewer strokes across your stone, making it easier to maintain a consistent sharpening angle. As a rule of thumb, a small knife can easily be sharpened on a large stone, but a large knife cannot easily be sharpened on a small stone.
Next we sharpen the opposite side of the blade. Just as you did before, sharpen the knife keeping an angle of 10' to 15'. Push the point you want to sharpen with your first, second and third fingers. While keeping the angle and pushing the point with your fingers, stroke the blade until it reaches the other edge of the whetstone. Then pull the blade back until it reaches the edge of the whetstone. This back and forth is counted as one stroke. Repeat it for about five strokes until you can see or feel some small burrs (edge curvatures).. Then move the position of your fingers to where you have not sharpened yet, and repeat this five strokes of sharpening processed from the tip to the base of the blade. When your whetstone becomes dry, occational watering during sharpening process will also help and improve smooth sharpening.
In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:
Seamlessly transition from the office to the gym with the Stuart & Lau Regimen Bag. The outer compartments are dedicated to work, with a tasteful blue nylon twill lining, padded laptop pouch, and various organizer pockets. In the center, you'll find the spacious 45L gym compartment, lined with a waterproof, wipe-down nylon. There's also a ventilated shoe pocket, interior and exterior water bottle slots, a rubberized base, and a built-in locker hook. Crafted from waterproof DuraLite fabric with full-grain leather trim and gunmetal hardware, it's built to last a lifetime — the same length as the S&L-backed warranty. Arrives with a leather key ring with a magnetic tab and a luggage tag with a detachable pen.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.
The unique three stone system features a 6" medium Arkansas, 6" fine Arkansas and 6" coarse synthetic stone mounted on a molded plastic triangle with handles on the end for easy stone selection. The sturdy molded plastic base has non-skid rubber feet for safety, a V-shaped trough to catch oil drippings and easy-to- read stone identification markings.
I've used ceramic rods, diamond plates, and leather strops for our sharpening needs. And, like most, I've tried a dozen little gimmicky sharpeners that, while some work, those that do often remove way too much material from the edge, making your blade wear down faster. I've also used oil stones, grinders and buffers for less meticulous sharpening of axes and such. These two stones from Unimi (600/1000 and 2000/6000) served as my introduction to whetstone sharpening. And I must say I like it. Though, I'm not sure of the need for investing in more expensive stones.
Now you may wonder, if a finer stone produces a better cutting edge why do I need a coarse stone at all? The answer is that finer stones work much more slowly than coarse ones. The amount of metal a fine stone removes with each pass is much less than what a coarse stone removes. If you have an edge with a good shape to it from a coarse stone, this is not a problem because the fine stone doesn’t have to remove much metal to improve the edge. If the edge is dull, it will take many times longer to reshape it with a fine stone than it would with a coarse one.
The basic concept of sharpening is simple – you're using an abrasive edge to remove metal – but the knife you buy may alter the method you should use. A general rule of thumb is that a waterstone can be used for both Japanese- and Western-style blades, but you should avoid pull-through sharpeners for Japanese knives (or any knife with very brittle blades).
When the block is intended for installation on a bench it is called a bench stone. Small, portable stones (commonly made of bonded abrasive) are called pocket stones. Being smaller, they are more portable than bench stones but present difficulty in maintaining a consistent angle and pressure when drawing the stone along larger blades. However, they still can form a good edge. Frequently, fine grained pocket stones are used for honing, especially "in the field". Despite being a homophone with wet in most dialects of modern English, whetstones do not need to be lubricated with oil or water, although it is very common to do so. Lubrication aids the cutting action and carries swarf away.