Sharpal 178N TRANSFORMAN 3-In-1 Diamond Round and Tapered Sharpal 178N TRANSFORMAN 3-In-1 Diamond Round and Tapered Rod Sharpener makes it easy to sharpen all kinds of knives including those with serrations gut hooks fishhooks and pointed tools. Industrial monocrystalline diamond is electroplated in nickel onto a steel base. Sharpen dry. No messy oil needed. Fine 600 grit (25 ...  More + Product Details Close
Unfortunately, the arrays of modern whetstone can be bewildering to the inexperienced sharpeners that so often times many of them end up with a crap or wrong decision on stone type for their utensils. The most difficult to determine is whether the whetstone is fake or fabricated with low quality of materials. To avoid this you can only go for the reliable brand of a whetstone. 

Put the pointed, narrow end of the sharpener up against the open end of the gut hook. The narrow, pointed end of the sharpener should face in toward the thickness of the blade, away from the edge of the gut hook. Match the angle of the sharpener to the original edge angle. This will maintain the correct sharpening angle and prevent you from getting cut by the blade tip. Hold the same angle when sharpening each side of the gut hook.
Very interesting. If you work flat, 45 degree is what I was taught. Love the wet stones, especially the oiled ones. The nice thing about the leather part, is the mirror finish on a razor sharp blade which is a must if doing fine wood working, carving etc. A rough blade simply does not have the fine detailed dexterity. I find that the oiled sandpaper can work great as well, but found that the refined clay bars (white refined fired clay rounds and flats etc) does a wonderful job of keeping those razor edges refined, smooth as possible and then one can high polish them for smooth cutting. Believe me, when working wood for a flute, one wants that refined edge.! Learning how to hone a blade on a flat surface teaches one to work outside without a table/wall handy too...:) But we all have to start somewhere!:) Anyway, great stuff and a great start for those who want more from their tools!:) Cheers!

Pressure is something that is sometimes not mentioned but in my experience and in my opinion, it is extremely important to apply the correct amount of pressure, I use three different levels of sharpening pressure, with my sharpening pressure being measured on a scale from 1-5 with 1 being very light and 5 being maximum pressure. When you initiate the sharpening process, when you have all your ducks lined up and you are ready to start, use P4 (Pressure at level 4, almost maximum). in this case it is you and the stone working together, you are going to apply pressure with your finger tips (2 or 3 finger tips) placed as close to the primary edge as you can get, i.e. over the area you are working on, on the opposite side of the blade. As you push the knife away from you in a trailing motion, apply P4 pressure to the knife as it glides over the wet whetstone, (whet means sharpen) you will see the black residue start to form in the water on the surface, this is Swarf and this is good, don’t feel obliged to remove this with water, it is fine. Continue working from the heel to the tip of the knife moving your fingers along the edge and applying pressure as you move the knife away from you on the right side of the knife and as you pull it towards you on the left side, these are called edge trailing strokes.
Inspired by the cookbook editor behind Julia Child, Edna Lewis, and James Beard, Great Jones Cookware equips home cooks like professional chefs and looks damn good doing so. Their five-piece set comes with all the essentials to cover anything from Beef Bourguignon to fried eggs. Included is a fully-clad stainless steel saucepan, skillet, and stock pot, a ceramic nonstick skillet, and the Dutchess — an enameled cast-iron Dutch oven that comes in a variety of eye-catching hues. Each piece is finished with their signature copper handle that's as easy on the palm as it is on the eyes.
Your immediate goal is to raise a burr on the side of knife opposite to the side you are sharpening and depending on the steel, the grit of stone and how you are doing, it will be either a very quick process or it will seem like it takes an eternity. Patience here will reward you, believe me. The sharpening process is incomplete with no burr creation on your first stone. (Yes, it is possible to stop at that magic moment without the burr forming but we are not there yet, we don’t even need to go there, ever, I am just mentioning it so those gifted sharpeners will be happy) . Think of the burr as the debris that is making the knife dull being forced down the blade towards the edge and over to the other side of the by your sharpening prowess. You form the burr, that knife will get sharp, no burr, you just need to look at your work. A Loupe is handy here, an inexpensive magnifying device with a light that allows you to see the edge very well, if you are not forming a burr, you are not reaching the edge. (Having a loupe also makes you look cool and scientific, like a Sharpologist).
Freshly brewed beer tastes great, but nailing the brewing process is tough. The LG HomeBrew Beer Machine makes it easy. This countertop gadget uses single-use capsules containing malt, yeast, hop oil and flavoring and an optimized fermentation algorithm to let you brew beer with a single button press, creating up to five liters of suds every two weeks. Offered in the initial launch are a hoppy American IPA, American Pale Ale, full-bodied English Stout, Belgian-style Witbier, and Czech Pilsner. The machine will be on display at CES 2019, a perfect spot for finding thirsty test subjects.
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.

Now move the blade – with a little pressure – in regular movements up and down along the sharpening stone. Always maintain the angle between the blade and stone. You will notice a burr become visible after five or so movements. Mentally divide the blade into three sections if the knife has a large blade. Always start with the tip and work back towards the bolster.

Some recommended products may use affiliate links. ProHuntingKnife.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc or its affiliates.
The basic concept of sharpening is simple – you're using an abrasive edge to remove metal – but the knife you buy may alter the method you should use. A general rule of thumb is that a waterstone can be used for both Japanese- and Western-style blades, but you should avoid pull-through sharpeners for Japanese knives (or any knife with very brittle blades).
A diamond plate is a steel plate, sometimes mounted on a plastic or resin base, coated with diamond grit, an abrasive that will grind metal. When they are mounted they are sometimes known as diamond stones.[12] The plate may have a series of holes cut in it that capture the swarf cast off as grinding takes place, and cuts costs by reducing the amount of abrasive surface area on each plate. Diamond plates can serve many purposes including sharpening steel tools, and for maintaining the flatness of man-made waterstones, which can become grooved or hollowed in use. Truing (flattening a stone whose shape has been changed as it wears away) is widely considered essential to the sharpening process but some hand sharpening techniques utilise the high points of a non-true stone. As the only part of a diamond plate to wear away is a very thin coating of grit and adhesive, and in a good diamond plate this wear is minimal due to diamond's hardness, a diamond plate retains its flatness. Rubbing the diamond plate on a whetstone to true (flatten) the whetstone is a modern alternative to more traditional truing methods.[13]

An extremely well written and informative article on sharpening. Overtime we all get to love certain stones for our sharpening needs. I am a huge coticule fan, and although i have used all the others, i always come back to this natural stone above all others. Still trying to figure if i chose it or it chose me! NEver the less there are so many options out there it is not hard with a little time and effort to find the right combination for your needs.

In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:

Again, burr formation is critical to success and if you are using a 1,000 grit stone on a dull knife, you may be there for a while but it will form. If you are grinding on one side for more than 3-4 minutes, flip the knife and work the opposite side, always feeling for a burr with your thumb on the opposite side to which you are working on. Remember, the fatigued metal is being forced down the blade towards the edge of the edge by your actions and the abrasive properties of the stone.


I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
×