Dull knives aren't just annoying — they can be downright dangerous. Keep yours in top shape with the Sharp Pebble Knife Sharpening Stone. It has a #1000 grit side for dealing with dull edges, and a #6000 side for honing to razor-like sharpness. It sits inside a silicone base, inside a non-slip bamboo base, and comes with an angle guide that slides over the spine, ensuring that even beginners can set a proper edge.
You will also need at least one finer stone. Once the shape of an edge is established, successively finer grits are used to refine the edge improving the quality of the cut it delivers. A dull edge will not cut well and should be shaped with a coarse stone. An edge sharpened on a coarse stone will cut better than a dull one, but still won’t be ideal and should be improved with a finer stone. As you progress through finer stones, the cutting edge will continue to improve. How many and how fine these stones need to be varies depending on how fine an edge you require.
Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.

JapaneseChefsKnife.Com (JCK, Established in 2003) is the direct internet sales division of The Kencrest Corporation. We supply a wide range of top quality Japanese Chef's knives at lower than Japanese Retail Prices direct from Seki City; the Japanese cutlery capital where fine knives are produced using over 800 years of Samurai sword-making tradition and history.
I purchased this set together with the 400/1000 grit stone assuming that some of my knives were quite dull and would need work on a coarse grit stone. Premium Whetstone Sharpening Stone 2 Side Grit 400/1000 | Knife Sharpener Waterstone with NonSlip Rubber Base & Flattening Stone. This is my first wetstone. First off I tried to sharpen my Chicago Cutlery boning knife. This knife is nearly thirty years old, has been abused in may ways and was quite dull. It was very difficult for me to get a burr on this blade, which I attribute to poor technique. Next I moved on to my Henckels Professional S paring and chef's knives. The paring knife was moderately sharp and was modestly improved after working over all three grits of stone. It would cut paper but again it was difficult to develop a burr with this blade. Undaunted I switched to the chef's knife. This knife is twenty years old and has never been professionally re-sharpened. I have sharpened it twice with a Lanksey sharpening system which marred the finish but did put a good edge on the blade. Lansky Standard Coarse Sharpening System with Fine Hones. The chef's knife was moderately dull and had several pits visible on the cutting surface. I modified my technique for passing the knife over the stone and worked the chef's knife over the 400 grit stone aggressively and eventually I was able to get a burr to form from the tip of the knife all the way to the handle. From there it was a simple process of reforming the burr on the 1000 grit stone and then finishing on the 6000. After sharpening, the chef's knife easily and cleanly slices a tomato with very light pressure and is in my opinion very sharp. Not sushi knife sharp but more than enough for the chopping and slicing I expect of it. I'm looking forward to going back and working both the boning knife and the paring knife over again. Don't expect a good result from this product the first time you use it. Watch videos on using a wetstone, expect to spend at least twenty minutes per knife at first, and practice forming a burr. If you can form a burr, you will be able to successfully sharpen your knife.
×