Technically, the name whetstone can be applied to any form of sharpening stone, regardless of what cutting fluid is typically used with it. However because whet sounds like wet, many hear the word and assume that it refers to a stone that is used wet with water. Actually, water stones, oil stones diamond stones and ceramic stones are all forms of whetstones. So, while all water stones are whetstones, not all whetstones are water stones.
The video above, from the How To You YouTube channel, explains everything you need to sharpen with a whetstone at home, and the best methods for doing so. Obviously, you’ll need a whetstone (as well as a few other things), and you’ll want to work near your sink or a bucket so you have easy access to water. Fill a container with water, then soak the whetstone in it until it stops bubbling. Inspect your blades for any trouble spots, and get to sharpening using the methods and motions described in the video; making sure to check your progress as you go. We’ve talked about sharpening knives with whetstones before, but this guide is a bit more thorough and the old video has since been removed.
Now you may wonder, if a finer stone produces a better cutting edge why do I need a coarse stone at all? The answer is that finer stones work much more slowly than coarse ones. The amount of metal a fine stone removes with each pass is much less than what a coarse stone removes. If you have an edge with a good shape to it from a coarse stone, this is not a problem because the fine stone doesn’t have to remove much metal to improve the edge. If the edge is dull, it will take many times longer to reshape it with a fine stone than it would with a coarse one.