Hold the knife in your right hand (or left) with your index finger along the spine of the knife and be comfortable, hold it tight enough so it doesn’t move as you sharpen but you don’t need a death grip on it. Wear shoes and if possible stand on a mat that will absorb the impact of the knife if you drop it. (You won’t drop it but be safe…..move your feet if you drop it!).

A: Most chefs have their own personal favorite and that’s what it comes down to for just about everybody; personal choice. If you’re the kind who likes to get personally involved in the process you might want to opt for a stone or stick knife sharpener.  These will allow you a certain amount of satisfaction knowing it was your expertise that produced the razor sharp edge. Others, however, are quite content to let the machine do the work and that’s fine too.
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
Removing the burr is fairly simple. You'll need a leather strop or block (this sort of thing), which is designed to catch the metal fibres from the knife. You could do it with a fibrous tea towel or some newspaper if you like, but I'd suggest going with leather to begin with. The motion is fairly similar to sharpening. Draw the knife over the leather, going away from the edge at roughly the same angle as when you sharpened. 

For woodworking tools like chisels and plane blades, you will need stones that are at least as wide as the blades themselves. Length is helpful but not always critically important. The one exception is when you're using a guide for sharpening tools. The guide often rides on the stone and longer stones permit you to use a much larger portion of the stone as both the guide and the edge need to simultaneously touch the stones.

Don't know. Not sure that I really care, as these stones definitely did the job that was asked of them, and did it with ease, even for a beginner whetstone user. I'll probably stick with them, at least until I get a lot more experience. Though, I do see a 10,000 or higher grit stone in my immediate future - more to play around with, than a feeling of genuine need.
There are three key ingredients to a great cup of coffee: the right bean, the right brew, and the right grind. The Camano Coffee Grinder ensures you get the last one right every time. It has a cast iron top arch and hopper that works in conjunction with a ceramic burr to provide a precise, consistent grind. All that sits atop a wooden base, which attaches to a Ball Jar to hold the ground coffee, giving it an old-timey look while ensuring dependable performance for years to come. Made by hand, every component is also made in the USA.
The Sharpening and Specialty lines of waterstones from Naniwa are available in several packages of three to five stones. The Specialty line is the same as the Sharpening line, but half the thickness and therefore less expensive. Both the Sharpening and the Specialty stones are 8 1/4" long by 2 3/4" wide, amply sized for most knives and tools. These are a higher grade stone that do not require soaking before use. While you would need a flattening stone in addition, these kits are a good way to enter into premium grade waterstones.
The stones from Shapton are probably the hardest of all Japanese sharpening stones. They will remain flat for a long time. They are therefore the best choice if you are looking for a relatively coarse stone that cuts quickly without having to be dressed repeatedly. The finer-grained stones also work very well. But Shapton stones do not provide the mirror finish you can achieve with softer stones. 

The goal in sharpening a serration is to maintain the ramp of the serration right to the edge. You do not want to create an edge bevel. Therefore we once again recommend the trusty felt pen trick. Paint the serration to be sharpened and follow your process. Evaluate if you are removing all the black. It should not take more than 5-8 strokes to resharpen if your angle was correct. Rotate or spin the sharpener as you go for the most even, consistent sharpening.
Clamp-style sharpening tools use a clamp with several holes with predefined angles. The stone is mounted on a rod and is pulled through these holes, so that the angle remains consistent. Another system is the crock stick setup, where two sticks are put into a plastic or wooden base to form a V shape. When the knife is pulled up the V, the angle is held so long as the blade is held perpendicular to the base. Several cutlery manufacturers now offer electric knife sharpeners with multiple stages with at least one grinding stage. These electric sharpeners are typically used in the kitchen but have the ability to sharpen blades such as pocket or tactical knives. The main benefit of using an electric sharpener is speed with many models that can complete the sharpening process in one to two minutes. The disadvantage is that the sharpening angle is fixed so some specialized knives, like a Japanese style Santoku, may need additional attention to sharpen to the ideal angle.
Selecting the proper coarseness for your sharpening stone is an important first step in sharpening your knife. Not every knife needs to start at the coarsest stone you have, on the other hand a very dull knife can not be sharpened on only your finest stone. Starting with the proper coarseness will ensure that you achieve the edge you need quickly. If your knife is very dull or has a nicked blade, start with your coarsest stone. The coarse stone removes material quickly so a poor edge can be refined quickly. However, the coarse stone must be followed up with your finer stone to refine the edge. If your knife is only slightly dull and just needs a quick touch up, starting at a medium or fine stone can save you time. Starting on a fine stone requires fewer steps but must only be used on an edge requiring little work.

Technically, the name whetstone can be applied to any form of sharpening stone, regardless of what cutting fluid is typically used with it. However because whet sounds like wet, many hear the word and assume that it refers to a stone that is used wet with water. Actually, water stones, oil stones diamond stones and ceramic stones are all forms of whetstones. So, while all water stones are whetstones, not all whetstones are water stones.
The basic concept of sharpening is simple – you're using an abrasive edge to remove metal – but the knife you buy may alter the method you should use. A general rule of thumb is that a waterstone can be used for both Japanese- and Western-style blades, but you should avoid pull-through sharpeners for Japanese knives (or any knife with very brittle blades).
Sharpening on the other hand is reupholstering the furniture or telling the hair stylist to give you a new look. Material is going to be removed from the edge of the blade. There’s no way around it. How much is removed will be a function of just how dull the knife has become or whether you’re sharpening to compensate for a chip in the edge or because the tip has broken off. If your knife is not damaged and you have it sharpened twice a year very little material will be removed each time, yet it may still be enough for you to notice just by looking carefully with the naked eye.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article.
This is a good quality stone for a beginner looking to learn about hand sharpening knives and blades. It holds up well, especially for the price point. New sharpeners are prone to gouging and scratching stones, pushing too hard, etc, and this stone handles the abuse nicely. The no slip base is very effective at cementing the stone in place, which is a critical safety feature.

At this point, I can flip the stone over and use the fine course side. Most Whetstones come with a nice wooden base that do a good job to hold the stone in place while sharpening. Before starting, you might need to add a bit more water to the surface. Now with the fine course stone, finish the sharpening process like before at the same blade angle and nice consistent passes along the stone. About 10 to 12 passes is good before switching to the other side of the blade. At this point, the blade should be extremely sharp. I’ll just give a quick paper test here. I can now slice paper quite easily with my knife.
I enjoy these stones so much that the feedback is not a deterrent at all for me, I don’t even think about it. The results are always nothing but top notch, they deliver exactly what I want, some of the sharpest knives I have ever produced were sharpened on Shapton Glass stones. They may be thinner but they last a very long time, they are easy to maintain as well,
Before you start sharpening, soak the stone in water for around five to 10 minutes, until it absorbs the water and a liquid film appears on the surface. After soaking, splash some water on top, and re-splash during the process if it ever gets too dry. You'll get a dark, splotch of steel and stone building up on the stone while you're sharpening the blade. This is totally normal so just splash the stone with some water to clean it off and allow it to perform more efficiently. 
Removing the burr is fairly simple. You'll need a leather strop or block (this sort of thing), which is designed to catch the metal fibres from the knife. You could do it with a fibrous tea towel or some newspaper if you like, but I'd suggest going with leather to begin with. The motion is fairly similar to sharpening. Draw the knife over the leather, going away from the edge at roughly the same angle as when you sharpened. 
It looks like it can be a Sci-Fi film prop. This is a 2 stage type of sharpening system. You'll get a non slip cushion with it which is at the bottom offering stability for the user. It's ergonomic handle provides a comfortable and easy grip. This cushion offers the stability needed when sharpening and polishing your pocket knife to it's absolute razor sharpness. The sharpener does the work as you hold down the grip and simply place your pocket knife to get sharpened by the motions of the ceramic and diamond sharpener wheels. Simply run your dull knives through the device and you'll get the results you've been looking for. This one will definitely help you when you learn how to sharpen a pocket knife on the Priority Chef.