As you continue to repeat strokes on the first time, eventually a tiny burr will form on the other side of the blade. To check for it, place the blade on your thumb, and pull it backwards. If the burr has formed, it should catch slightly on your thumb (with really fine grit stones, say 2000 or above, you won't feel this). This may take up to 30 or 40 strokes, and is the indication that you should switch and start sharpening the other side.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
4. Start sharpening the first side of the blade. With your blade set at the prefect angle, you’re ready to start sharpening. Imagine you’re carving off a slim piece of the stone’s surface. Personally, I bring the blade into the stone. Other people stroke the blade away from the stone. Both ways work, so just use whatever technique you prefer. If the knife blade is curved or if it’s longer than the stone, you’ll need to sweep the blade sideways as you work, so the entire edge is sharpened evenly. Apply moderate pressure as you sharpen. No need to bear down hard on the blade. After you make one stroke, start back at the beginning and repeat. Do this about 6-12 times.
As you continue to repeat strokes on the first time, eventually a tiny burr will form on the other side of the blade. To check for it, place the blade on your thumb, and pull it backwards. If the burr has formed, it should catch slightly on your thumb (with really fine grit stones, say 2000 or above, you won't feel this). This may take up to 30 or 40 strokes, and is the indication that you should switch and start sharpening the other side.
We begin our whetstone sharpening process with a 400 grit stone to shape the edge of the blade and develop a burr along the edge of the knife. Once the shape is set and we have a burr along the full length of the knife we move on to the 1000 grit stone to refine the edge and begin removing the burr, followed by the 5000 grit fine stone stone to give a beautiful sharp edge on the blade. We finish off each knife on a leather stropping block which removes the final remnants of the burr and gives a strong and lasting edge.
"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 
Thanks to the legacy at Kamikoto, I'm the proud owner of the last cooking knives I will ever need. Strong, perfectly balanced, comfortable and beautifully designed. Kamikoto has truly exceeded all expectations. Along with a superior product comes excellent customer service. Every inquiry was answered quickly and diligently. The moment these blades are removed from their casing you can feel the craftsmanship. But it's when you put them to the counter they truly sing. I will enjoy my Kamikoto blades for the rest of my life. Thank you from Hawaii !! Isaac S.
The price of a whetstone is most often indicative of its quality, which directly correlates to how hard the stone is. “The more expensive stone, typically, is comprised of a harder material, which is efficient at grinding metal off of a good-quality knife,” Lau says. “It allows you to sharpen quicker [and] it allows you to sharpen a very high-quality knife, whereas a cheaper stone may not create a good edge if a knife is made from a very hard metal.” A well-made whetstone should cost $60 to $70.
Our Whetstone Knife Sharpener Kit Comes With The Following: Double-sided premium quality 1000/6000 fine and super fine honing stone that sharpens and polishes A knife angle guide that keeps blades steady and at a perfect angle for sharpening A cleaning or laaping stone for the sharpening stone that keeps it in tip-top shape An aerated, non-slip, super slick, durable plastic protective box with breathing holes to keep product safe and dry A detailed instruction manual eBook with lots of tips and tricks suitable for every skill level

Works well. Just got it today, sharpened two pocket knives, one a 8Cr13MoV Chinese steel, the other s30v American steel The stone made short work of both steels (which were pretty sharp already). But notably was able to make the s30v hair shaving sharp easily, something I've had trouble with. Inexpensive and useful, I love this stone. It's not the Ninja sharp 8000+ grits that you can find, but for pocket knives and EDC, it's perfect and inexpensive. Get One!!!!!!!!!!!!
We recommend that customers invest in Kamikoto’s Toishi Sharpening Whetstone to keep handcrafted knives sharp and ready to cut. The Toishi Sharpening Whetstone sits on a beautiful wooden bamboo stand and features two sides – one with a coarse grit to grind away any roughness, and the other with a fine grit that sharpens and polishes the edge. The finer the grit, the finer the edge on your knife. The sturdy wooden stand holds the whetstone safely in place so you can concentrate on gaining the sharpest edge possible.
Manufacturer contacted and sent a new one for replacement. Great customer service but replacement item was nicked on the corner. It was still usable so i didn't bother to ask for another replacement. I would recommend item to be shipped in another box instead of an over-sized yellow envelop which is not adequate protection. Item sharpen my knife pretty good though..

Novaculite is a type of stone that can only be found in North America and in a limited geographical region of Texas, Oklahoma and Arkansas. The novacula stone formation in the Ouachitas of Central Arkansas is geologically considered, without a doubt, to be the purest and finest quality.  Its extremely high-purity silica content exceeds 99 percent. This Ouachita Mountain Novaculite is the only Novaculite we use in producing the FINEST whetstone sharpeners you can buy.

Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure.
✅ PREMIUM QUALITY : Our products have been inspected by a reputable third party inspection company. Each product has been checked,put under a durability and functionality test before shipped to you. NO COMPROMISE on quality! This simple-yet-unparalled award winning tool is used by everyone from stay at home moms to various professionals. Don’t forget to buy this as a PERFECT GIFT for your family & friends.
A DUAL FUNCTIONING BLOCK This carefully designed tool is actually two stones in one. When deciding on the perfect wetstone knife sharpener, you want a rock that has a lower-numbered grit for sharpening and a higher-numbered grit for polishing. One side of our stone is #1000 and is designed to sharpen dull blades with accuracy and precision. The other side is #6000 and provides a deluxe polishing effect. Our aluminum sharpening stone ensures optimal performance of your knives.
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.
This is an excellent stone for sharpening any knife especially given it has the two sides (1000 and 6000) so it’s basically 2 stones in one which cleaned up the dull edge of my favourite knife in no time. The knife guide takes all the guessing out of trying to work out the correct angle which I needed. The other thing about the Mikarto whetstone kit is the base which doubles up as the storage for the angle guide and fixing stone so you don’t loose them when stored away and also has a the rubber feet to stop it moving when being used no. I think it’s a bargain for the price especially with the amazing packaging which makes it perfect for a gift for anyone that likes cooking and loves their knives. Highly Recommend!
Ceramic whetstones are meant to be used without water or oil, which means they can be used almost anywhere and are ideal for chefs or cooks who have limited working spaces. They will give you a very sharp blade and as their surface is very hard they will maintain their flat surfaces over the long-term, but as they have a fine grit, they can break if you drop the stone. 

A wide selection of high-quality knives from well-known brands such as Morakniv and Stanley as well as our own brand, Cocraft. Here you'll find tool knives for most kinds of jobs. Knives for tradesmen, craftsmen, fishermen, campers and many more. A high-quality range of knives is the Morakniv series of sheath knives made in Sweden, which have either stainless steel blades or carbon steel blades, a material, which is easily sharpened. Our work knife range includes various specialised knives for different tradesmen, carpet knives, utility knives, craft knives, penknives, folding knives and rotary cutters. Regardless the type of knife, a blunt blade is both inefficient and dangerous. With a whetstone, sharpening steel or knife sharpener, you'll be able to keep a keen edge on your blade and ensure that your tools are always ready for use. Some knives, such as snap-off blade knives and utility knives don't need sharpening. They take disposable blades, which of course we sell replacements for.
The price of a whetstone is most often indicative of its quality, which directly correlates to how hard the stone is. “The more expensive stone, typically, is comprised of a harder material, which is efficient at grinding metal off of a good-quality knife,” Lau says. “It allows you to sharpen quicker [and] it allows you to sharpen a very high-quality knife, whereas a cheaper stone may not create a good edge if a knife is made from a very hard metal.” A well-made whetstone should cost $60 to $70.

I first received my Kamikoto knife as a gift. I have found my new favorite knife! I am very pleased with the balanced grip, which in itself is a work of ergonomic art. I have never used a single bevel blade before and, after a bit of experimenting, find it an improvement for several tasks. Based on my experience with the Kamikoto knife, I purchased the Knife Set for my son who is a graduate chef of many years experience. He also is very pleased with his gift.


As you continue to repeat strokes on the first time, eventually a tiny burr will form on the other side of the blade. To check for it, place the blade on your thumb, and pull it backwards. If the burr has formed, it should catch slightly on your thumb (with really fine grit stones, say 2000 or above, you won't feel this). This may take up to 30 or 40 strokes, and is the indication that you should switch and start sharpening the other side.

After several uses the Kamikoto is proving itself to be better than expected. As a professional I use different knives all the time and in fact have several thousand dollars worth of very fine blades of various manufacture. As it stands right now, if I could pick only one knife from all of them, I would take the Kamikoto. Fish, vegetables, raw meat, cooked meat, it handles them all very well and is a pleasure to use because of excellent balance and weight. And the edge… magnificent. Care and careful sharpening will be important, but then it always is with the finest of things. I would unhesitatingly recommend this product to people who appreciate the best. This is not a knife for fools or clumsy people. Buy, use, enjoy. And to the people at Kamikoto; “Thank You for making such a beautiful thing!”
After several uses the Kamikoto is proving itself to be better than expected. As a professional I use different knives all the time and in fact have several thousand dollars worth of very fine blades of various manufacture. As it stands right now, if I could pick only one knife from all of them, I would take the Kamikoto. Fish, vegetables, raw meat, cooked meat, it handles them all very well and is a pleasure to use because of excellent balance and weight. And the edge… magnificent. Care and careful sharpening will be important, but then it always is with the finest of things. I would unhesitatingly recommend this product to people who appreciate the best. This is not a knife for fools or clumsy people. Buy, use, enjoy. And to the people at Kamikoto; “Thank You for making such a beautiful thing!”
×