Thanks to the legacy at Kamikoto, I'm the proud owner of the last cooking knives I will ever need. Strong, perfectly balanced, comfortable and beautifully designed. Kamikoto has truly exceeded all expectations. Along with a superior product comes excellent customer service. Every inquiry was answered quickly and diligently. The moment these blades are removed from their casing you can feel the craftsmanship. But it's when you put them to the counter they truly sing. I will enjoy my Kamikoto blades for the rest of my life. Thank you from Hawaii !! Isaac S.
We begin our whetstone sharpening process with a 400 grit stone to shape the edge of the blade and develop a burr along the edge of the knife. Once the shape is set and we have a burr along the full length of the knife we move on to the 1000 grit stone to refine the edge and begin removing the burr, followed by the 5000 grit fine stone stone to give a beautiful sharp edge on the blade. We finish off each knife on a leather stropping block which removes the final remnants of the burr and gives a strong and lasting edge.
The cookies we want to set are for analytics purposes only. These tell us things such as how visitors get to our site, what pages on our site were looked at, and how long people stay for.It tells us what countries people are browsing from, but it does not tell us who those people are. Google stores the analytics data, not us. (If you are interested in learning more about this you can visit http://www.google.com/intl/en/analytics/privacyoverview.html).Once you have consented to our cookies, we set one futher cookie of our own so that our site remembers you have done this. If you are happy with this, then just carry on using our site as you would normally.
We begin our whetstone sharpening process with a 400 grit stone to shape the edge of the blade and develop a burr along the edge of the knife. Once the shape is set and we have a burr along the full length of the knife we move on to the 1000 grit stone to refine the edge and begin removing the burr, followed by the 5000 grit fine stone stone to give a beautiful sharp edge on the blade. We finish off each knife on a leather stropping block which removes the final remnants of the burr and gives a strong and lasting edge.
To sharpen a knife using a whetstone, submerge the stone in water for approximately ten minutes. When the stone absorbs the proper amount of water you will no longer see air bubbles floating to the top of the water. Place the whetstone on a flat, stable, slip-resistant surface coarse side facing up. Move the blade back and forth across the stone several times, tip to heel, at the correct angle for your knife. While sharpening, it is important to continuously pour water on the whetstone. Small particles release from the whetstone and form an abrasive substance when in contact with water. Repeat on the other side of the blade. Once this is complete, flip the stone over to the fine side and repeat the process. The fine side will take off any leftover steel. Finally, rinse the knives off in hot water.
4. Start sharpening the first side of the blade. With your blade set at the prefect angle, you’re ready to start sharpening. Imagine you’re carving off a slim piece of the stone’s surface. Personally, I bring the blade into the stone. Other people stroke the blade away from the stone. Both ways work, so just use whatever technique you prefer. If the knife blade is curved or if it’s longer than the stone, you’ll need to sweep the blade sideways as you work, so the entire edge is sharpened evenly. Apply moderate pressure as you sharpen. No need to bear down hard on the blade. After you make one stroke, start back at the beginning and repeat. Do this about 6-12 times.
In most cases a sharpening stone will be a combination of sharpening grains and a binding agent. However, in case of a Ardennes Coticule it is a completely natural product. The grains have cutting edges which enables them to sharpen your knife. As soon as a sharpening stone is used little pieces of the grains break off, revealing a new cut ing edge. The higher the number, the finer the grain. Stones with coarse grains (up to grain 400) can be used to shape the blade of a blunt knife. You can subsequently take care of the fine finish with a stone with a smaller grain.

Clauss DualDrive is the first non-chuckable sharpener for Clauss DualDrive is the first non-chuckable sharpener for both #2 and carpenter pencils. Just use with your current bit on the fly. Manual or power-driven design evenly sharpens. Integrated shaving reservoir with see-through window. Features high carbon steel blades and a lifetime warranty.  More + Product Details Close
I'm using this for a set of kitchen knives. As far as their quality goes, they are a name brand, but middle tier at best. The kind you can pick up at a mall kitchen store. They were all dull and in need of sharpening. After using these stones, my knives were all insanely sharp. They were noticably sharper than when I first bought them. I'm not experienced with sharpening stones, so I can't say how these compare with others, but for my needs as a non-professional, this set is perfect. Outperforms my needs.
From the moment I ordered the knife set, I was emailed every step of the way till they were delivered. When I opened the box I instantly knew I made the correct decision. The weight, balance and edge were perfect. A few of my friends have handled them as well and all have asked the same question. How can I get these. I highly recommend these knives.
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.
The cookies we want to set are for analytics purposes only. These tell us things such as how visitors get to our site, what pages on our site were looked at, and how long people stay for.It tells us what countries people are browsing from, but it does not tell us who those people are. Google stores the analytics data, not us. (If you are interested in learning more about this you can visit http://www.google.com/intl/en/analytics/privacyoverview.html).Once you have consented to our cookies, we set one futher cookie of our own so that our site remembers you have done this. If you are happy with this, then just carry on using our site as you would normally.
×