Sharpal 178N TRANSFORMAN 3-In-1 Diamond Round and Tapered Sharpal 178N TRANSFORMAN 3-In-1 Diamond Round and Tapered Rod Sharpener makes it easy to sharpen all kinds of knives including those with serrations gut hooks fishhooks and pointed tools. Industrial monocrystalline diamond is electroplated in nickel onto a steel base. Sharpen dry. No messy oil needed. Fine 600 grit (25 ...  More + Product Details Close
Our test of the Brød & Taylor turned a dull blade into one that effortlessly and cleanly sliced both tomatoes and paper. Due to the reputation of V-notch carbide sharpeners, however, I was concerned about the durability of the edge, so I did an additional test: I used the Brød & Taylor to sharpen my old pocketknife, which uses 440C steel, one of the earliest knife-worthy stainless alloys and one that more refined alloys have since surpassed. I then made 50 slices through a cardboard box, rehoned and repolished the knife (but did not resharpen it), and made 50 more slices. After all that, I was still able to slice a tomato and peel an apple without problem. That’s impressive: Cardboard is so tough on blade edges that knifesmiths use it as a kind of stress test.
The design of the knife sharpener is unique. It sticks to any flat surface due to the suction pad. This gives the user excellent control, safety, and confidence when using the knife sharpener. It can work on even serrated knives. The user needs just to slide your knife drawing it through one direction. It can be easily stored in a drawer making storage very easy.
I’ve been sharpening knives for over 35 years. I have owned an Edge Pro Professional version for several years and I have sharpened thousands of knives with it. I have sharpened thousands of knives freehand as well. This is something I have pondered over for many years: Nobody is paying me to say what I say, sharpening knives is the most important thing in my life, therefore, I am qualified to express my opinion… “what’s the best knife sharpener?” Read on!

Our lineup included sharpening stones, a variety of manually operated sharpeners in several designs, and electric machines. Some of the devices were costly; others, cheap. Some were surprisingly easy to use; others had a steeper learning curve, requiring dexterity, coordination, or patience. But overall, we were pleasantly surprised to find most of the sharpeners fairly easy to use and effective. By the end of our research, we felt confident that transforming a blade from dull to sharp is much easier than we had imagined.
The best knife sharpeners are easy to use and give your knives that desirable sharp edge. Because knife sharpeners exist in a variety of configurations, finding just the right type of knife sharpener for your needs requires a bit of sharp study. (Apologies for the bad pun.) Continue reading to learn more about this product area that will give your search for the best knife sharpener the proper edge! (We're really sorry.)

Honing rods refresh an edge, but they do not sharpen. That’s an important distinction. Honing is something that’s done regularly to tune up a blade, such as before preparing a meal, or immediately after sharpening. That’s because honing straightens the existing edge. Sharpening removes metal from the edge, which is why it shouldn’t be done as often as honing. 
The continuous diamond stone surface will work effectively when sharpening tools such as the scissors. You will have two types of diamond stones to choose from including the mono-crystalline and poly-crystalline. The diamond sharpening stone is preferable over other brands because they have a very flat surface, which will offer a perfect cut every time. 
If you want to re-shape the edge on a knife that isn't set to a 15- or 20-degree angle, or restore a more damaged edge, the medium-grit rods that come with the Sharpmaker don't remove enough metal. Users have reported good results, however, with the Spyderco Diamond Triangle Pair (Est. $50), which are diamond rods for the Sharpmaker system. Of course, if a knife edge is severely damaged, you're usually better off sending it out to be re-shaped, but the Spyderco Sharpmaker can handle anything short of that, and is small and light enough to tuck easily in your pocket or a kitchen drawer.
Most electric sharpeners use a 2 or 3 step process to create, sharpen and hone the edge of your blade. The first step in the sharpening process involves using a coarse grit, which sharpens extremely dull or damaged blades. The last step in the process uses a fine grit, which hones the blade to the desired finish. When an electric sharpener is turned on, it spins the sharpening stones. These stones sharpen the knife placed in the slots, to the desired sharpness. Most of them come with guides, which allow you to obtain the perfect angle. This makes them popular since they simplify the whole process of sharpening knives.
Although it is slightly expensive than other tool sharpeners, this one saves you quite some precious time. It is one of the fastest ways to get all your blades sharpened. In addition, you just need to spend a few hours with it, and you will learn its entire operational procedure. Avoid excessive sharpening, since it might leave scratches on the blade’s surface.
Begin with your lower-grit stone. Place the heel of your knife on the far edge of the stone, holding the blade gently but firmly with both hands at a 15- to 20-degree angle. Using even pressure, slowly drag the knife over the stone toward you down the length of the stone while simultaneously moving the knife such that the contact point moves toward the tip of the blade.
“I bought this sharpener in 2014, it’s now 2018, and it’s still going strong. In fact, I just pulled out all of my straight-edged kitchen and dinner knives, and sharpened all of them. I have never had a problem with it; it is perfect for everything from my fillet knives to my cleaver. I try to keep up on sharpening my knives every now and then, so it’s usually only a few swipes on each side for ‘coarse’ side, and a few swipes on the right for the ‘fine’ side. I go slowly on the left, two to three seconds each swipe, and fast on the right, a second or so. Every time, I get a perfect, sharp edge, and depending on the quality of the knife, it lasts and lasts. It doesn’t take too much of the metal down either, just makes a lovely edge. This is one of my favorite purchases in my kitchen. I used to use manual sharpeners, but have long since thrown them away. Almost four years and still going strong. Excellent buy!”
1 Based on the level of net new purchases (purchases less credits) that are posted to your Gas Advantage Mastercard account in any monthly billing period, you will be entitled to a discount on each litre of gasoline or diesel fuel that is purchased for a motor vehicle at Canadian Tire Gas Bars during the following monthly billing period and that is charged to your Gas Advantage Mastercard. The discount that you receive in a billing period will be reduced to 2¢ per litre after you have made purchases of more than $500 for gasoline, diesel fuel or any other sundry items at Canadian Tire Gas Bars during that billing period using your Gas Advantage Mastercard. For complete program details please read the Canadian Tire Gas Advantage Mastercard Terms and conditions.

Meanwhile, if you want something that you can use to sharpen a variety of knives and edges, including small and pointed tools, you might want to consider the DMT WM8CX-WB 8-Inch Duo Sharp Plus Bench Stone – Coarse/Extra Coarse with Base. For less than a hundred bucks, you can even use it to repair a damaged edge because of its extra-coarse diamonds.
It comes with 3 slots through which you can place and pull your pocket knife blades. First you have a 2-stage process to sharpen your straight edge blades. The stage 1 uses the Coarse slot, with diamond-coated disks specifically meant for damaged, dull, and excessively worn blades. Then the stage 2 uses the Fine slot, to give it that extra fine edge. In the middle slot, you have the fixed angle sharpener for serrated blades.
The edge the Trizor XV made was the best in our tests. In contrast to the “toothy” edge that the manual Chef’sChoice ProntoPro 4643 creates, the Trizor XV polishes an edge to a razorlike finish—meaning the knife is perfectly capable of straight-up-and-down chop-cutting of items like onions and garlic, as well as traditional push- and pull-cutting. Perhaps the highest compliment we can give the Trizor XV is that, when the test was done, we resharpened the knives that we had used with the rejected competition models on the Trizor XV.

Step 2 is to take the time to mark your stone. These marks will show whether or not the lapping plate has flattened a specific area on the stone. Make sure that you make a complete mark from one side of the stone to the other horizontally. The marks will wear away, when the plate has completely flattened each area appropriately. This is the only way to determine if the lapping plate is effectively doing its job.

From camping to fishing to hunting, this sharpener can come with you wherever you go and quickly clean up any wobbly, rusty, slightly dull blade in a snap. The rod itself retracts into the handle to not only make it take up less space, but also to protect the sharpener from bumps, scratches, and the external environment. Once collapsed, it is small enough to fit inside your pocket and even features a pocket clip for easy transportation.
These are probably the most widely used sharpening tools in the world. The rods are fitted into a handle which you hold on top, while you set the rod’s tip on the table. Then you just glide the knife’s edge along the length of the rod to sharpen it. This will however need some sort of skill on your part, because the wrong angle will just deform your knife instead.
To answer an obvious question: The difference between 15 degrees and 12 degrees is so slight that a 15-degree sharpener is fine for both kinds of bevels. So if a dedicated 15-degree sharpener is all you need (that is, if you own only Asian or post-2011 European knives), we have good news: Chef’sChoice makes the otherwise identical Pronto 463, which contains a single Asian-style sharpening slot. (For the testers at Cook’s Illustrated, the Pronto 463 is the top choice among manual sharpeners.) And if you own older European knives exclusively, the company sells a dedicated 20-degree model, the Pronto 464.

Once that is done, you would proceed to start the sharpening process with a coarse grinding wheel. This is made of saphirite and helps create the proper angle. The 2nd stage involves moving on to a medium grinding wheel to give precision. The 3rd and last stage is sharpening on the fine slot. This sharpens your knife to perfection with an ultra-fine-grit ceramic wheel that sees to it that your blade is polished to an exact, razor sharp edge.
I understand that I am missing some items here but that’s not important, most people will make up their own minds on what method of sharpening is best for them. In my dream sharpening setup, I would have all my water stones, the Edge Pro Professional and the Wicked Edge Precision Sharpener. If the most important thing to you is making your knives sharp and you just don’t think you will have the time or patience to learn to free hand sharpen that the Edge Pro Apex is likely perfect for you.
×