A pull-through knife sharpener is easy to use and definitely a good option for those who want sharp knives, if convenience and speed are a high priority with sharpening. The true ‘razor edge freaks’ will have to take a look Japanese water stones. These enable you to put the ultimate razor edge on any blade. However, they do demand some technique and practice at first. Of all the knife sharpeners which we tested, the Minosharp Plus 3 is an absolute winner. With it’s ceramic wheels it gradually transforms your knife in three phases, from blunt to nice and sharp. This is done within a very acceptable time frame. If speed is most important to you of all qualities a pull-through sharpener can have, we will advise you to choose the Vulkanus.
Our test targets consisted of 5 pounds of tomatoes and sheets of regular 8½-by-11-inch paper from a writing pad. (The “paper cut” test is a universal standard among sharpening enthusiasts.) After we tested each knife against both objects in its dull state, we sharpened it according to the manufacturer’s instructions on one of the seven sharpeners. We then repeated the tests and noted the relative improvements in cutting performance. We also paid attention to an issue that’s common to virtually all manual and electric sharpeners: their inability to sharpen all the way to the heel of the blade, the part closest to the handle. While stones and jigs can sharpen the entire length of a blade, most manual and electric sharpeners have a slotlike structure around the sharpening element that prevents the last quarter-inch (best case) to inch (worst) of the edge from reaching the sharpening element.
Mine came plain white then started to darken after a few weeks. About 4 weeks in it settled to a more natural stone/slate grey. The leather has darkened a bit too and remains soft and comfortable. The leather remains easy to adjust and my selected sizings stays in place firmly. Overall It feels, looks and works great. The knot and darker stone/leather compliment each other well.
Begin with your lower-grit stone. Place the heel of your knife on the far edge of the stone, holding the blade gently but firmly with both hands at a 15- to 20-degree angle. Using even pressure, slowly drag the knife over the stone toward you down the length of the stone while simultaneously moving the knife such that the contact point moves toward the tip of the blade.
Lastly, the stropping stage. Remember seeing old barber shops on television? Remember that leather paddle they used to buff the straight razor? That is stropping. The strop can be leather or canvas and it's the final step in polishing the blade, making an even surface. Depending on the use of the knife, this step may be omitted. A chef will not require the blade precision chopping vegetables that a barber requires shaving with a straight razor on a gentleman's face. The chef may simple steel the blade and keep working.
The humble sharpener tends to elicit more divergent opinions than just about any other type of kitchen tech. Everyone, it turns out, has their own take on which type of sharpener works best and why and most serious chefs aren’t shy about voicing their opinion. As you can imagine then there are a number of things most chefs – both professional and amateur – look for in a sharpener in order to ensure they get the one that’s right for them. These considerations include:
At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.