We bought this for our parents as a little random gift to have at their home. I suggest using it for your cheaper everyday knives. It sharpens really well! The only drawback is that my husband noticed that eventually it bent some a few of the cheapo knives. The knives were cheap, but this sharpener ended up damaging them (but still got them to be sharper). If you don't really care for the little dings and changes to a small portion of your knife, as we don't with our cheap ones, it's still worth using! I suggest to only use them on your more inexpensive knives because I'm not sure how I'd feel using them on more expensive knives, because you really don't want to damage those in case it does the same thing to them!
With this Edge Grip Bottom, you can place it on the edge of the countertop and you can sharpen the knife by pulling it from heel to tip through the slots. This bottom also lets you just place it on top of the countertop, but at least you have options to choose from. The non-slip material at the bottom makes sure that everything’s is safe and secure when you begin your sharpening process. And it also comes with a non-slip rubber grip handle so you can have a secure and firm hold while you sharpen your knives.
I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
In my case it leaves it standing proudly at my sharpening station ready to go to work when I get a knife that just seems to cry out for what the versatility of the Edge Pro delivers. There are certain knives that are difficult to sharpen freehand. There are people who want a mirror finish on their hunting or tactical knives. While one can achieve this either way, the precision offered by the device is capable of creating mirror finishes on bevels that are quite beautiful. What If i want to create a Relief Angle, I can simply do this by grinding at 15 degrees for example and polishing that Relief Angle as much as I want to. Then I can sharpen it at 20 degrees per side and I have an extremely sharp knife that will perform very well in a kitchen.
The little gadget is also one of the few that are powerful enough to turn your 20 degree edges into 15 degree, hence the name XV. According to Chef’s Choice (and common physical understanding, for that matter), the smaller angle, which is usually found on Japanese knives, allows the knife to cut more easily and perform better than the. traditional 20 degree edged knife from Europe and the U.S.
You want sharpening stones that will be useful for the majority of your edges now, and that will remain useful as you expand both your tools and your sharpening toolkit in the future. Ending up with duplicate stones or ones that are no longer useful as you gain new knives or tools is a waste of money. The goal is to start with something that will stay with you as your needs develop.
Thanks as well to you Paul! My Wusthof knife set arrived yesterday, and I was able to pick them up at the post office today. They were well packed, you do a better job with newspapers than Amazon does with packing products. They are, as expected, beautiful. I believe that as Wusthof claims these may be the last knives I ever buy. I have to tell you, I was amazed to find such great prices on your site, and this was my chief motivation to purchase from you. However, I very much appreciated the meaningful comments and descriptions on your website from someone who themselves use and stand by a quality product. You can count on my recommendation to anyone in the market for quality cutlery.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
Now it's time to polish. This is when you'll swap over from the coarse grit to the finer grit (make sure this side is wet, too). I found the knife still had a bit of grime on it, so I gave it a wipe clean beforehand. The motion is exactly the same as with sharpening, but you can apply slightly less pressure, and limit to roughly 30 strokes on each side.
“I had let my Santoku knife go a bit too long without sharpening (maybe a few years …), but about a dozen passes on the ‘coarse’ side, followed by a handful on the ‘fine’ side, and it’s slicing through veggies like I just bought it! It’s smaller than I thought it would be, but definitely gets the job done! I like that the bottom is grippy, and the inverted V for stabilization is perfect. I’d definitely buy this again and recommend it to friends!”
Actually, the company contacted me to make sure I received the stones and that I was happy with them. Excellent service. The stones are great! I'm pretty much a novice so the clear instructions that came with the stones and the eBook instructions were wonderful. The eBook had quality pictures demonstrating the use of the stones and the written instructions were clear and to the point. Within minutes of opening the box I had the stones figured out and sharpening my AF survival knife, my pocket knife and a couple of my wife's kitchen knives...which included a very expensive chef's knife. Very satisfied with this product and highly recommend it.
The DMD double-sided bench stone sports two different grits: a coarse 400 and fine 1,000. The base is molded ABS plastic and features wide, anti-skid rubber feet to keep the sharpener in place while working on a flat table, counter or bench. The sharpening surface sits in a cavity of the base. To change grits, flip the hone over and return it to the base.
Honing rods refresh an edge, but they do not sharpen. That’s an important distinction. Honing is something that’s done regularly to tune up a blade, such as before preparing a meal, or immediately after sharpening. That’s because honing straightens the existing edge. Sharpening removes metal from the edge, which is why it shouldn’t be done as often as honing.
In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:
In most cases a sharpening stone will be a combination of sharpening grains and a binding agent. However, in case of a Ardennes Coticule it is a completely natural product. The grains have cutting edges which enables them to sharpen your knife. As soon as a sharpening stone is used little pieces of the grains break off, revealing a new cut ing edge. The higher the number, the finer the grain. Stones with coarse grains (up to grain 400) can be used to shape the blade of a blunt knife. You can subsequently take care of the fine finish with a stone with a smaller grain.
However, because the Belgian Blue stone generally occurs in relatively wide columns with much thinner layers of Vielsalm Coticule on either side adjacent to the slate, the Belgian Blue stone is more plentiful that Coticule and thus, it’s somewhat less expensive. But, it’s also somewhat softer than Coticule and is not divided into different grades as Coticule is. Furthermore, because it is a softer stone than Coticule, it is sold without a substrate layer.
Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months.
The base has several slots set at different angles. Changing slots lets you adjust the Spyderco Sharpmaker for kitchen knives with a 15- or 20-degree edge, and users say it excels at sharpening scissors and utility knives too. "There isn't much the Spyderco can't sharpen," writes Scott Gilbertson for Wired, explaining that the open design makes it easy to do unusual things like de-burring a Phillips head screwdriver or sharpening wire cutters. You can also use the Spyderco Sharpmaker to sharpen serrated blades.
You've acquired a good chef's knife, you're using it almost daily to make tasty dinners for the family, and it's stored in a nice knife rack or a magnet for safekeeping. So why stop there? Keeping that knife's edge fine will make cooking not only safer but, let's face it, much more fun. Whether you've spent £150 on a high-end knife or under a tenner on a dinky paring knife, keeping it sharp is crucial.
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.