If you want to re-shape the edge on a knife that isn't set to a 15- or 20-degree angle, or restore a more damaged edge, the medium-grit rods that come with the Sharpmaker don't remove enough metal. Users have reported good results, however, with the Spyderco Diamond Triangle Pair (Est. $50), which are diamond rods for the Sharpmaker system. Of course, if a knife edge is severely damaged, you're usually better off sending it out to be re-shaped, but the Spyderco Sharpmaker can handle anything short of that, and is small and light enough to tuck easily in your pocket or a kitchen drawer.
A sharpening stone is the most basic type of knife sharpener, this is not to say that they do not offer great benefits, but only that they do not have a lot of features. The traditional knife sharpener was constructed out of novaculite or aluminum oxide, but with technology the sharpening stone has come a long way. These stones are now constructed out of several different types of material including diamond, oil, water, and ceramic.
Once you set the sharpener up, start your blade from where the edge starts closest to the tang and run it down the hone, at the same time pulling the blade back toward you, ensuring the hone contacts the entire length of the cutting edge all the way to the tip. Hence, you’re doing two simultaneous motions—moving down the hone and pulling the blade back toward you. Do it all with light pressure.
With the DMT process, you get the most number of diamonds per square inch, which boosts the durability of the sharpening surface. These stones are also amazingly flat, so that you’re assured of even contact with the knife.You can use this sharpening tool for various types of knives. These include many types of home kitchen knives, gardening tools that include your spade and trowel, outdoor or hobby knives including tactical knives, fillet knives, machetes, axes, and hatchets, and also woodworking implements like your chisel and veiner.
Overall, using one of these machines is entirely effortless and easy. You only need a single hand, which cannot be said for the models above. Once you’ve got the sharpener and the knife, you will be able to adjust the settings on the machine. Remember that each individual model will have a variety of different settings to play around with. Once you’ve got them set to your particular preferences, you’ll be able to insert the blade into the sharpener and allow the machine’s motor to do all of the work.
The Work Sharp WSKTS-KO Knife and Tool Sharpener is specifically designed to handle a wide range of knife and tool sharpening jobs. One of its main features is the precision sharpening guide, which can be adjusted from 15 to 30 degrees. It allows 1 degree increments. These adjustments allow you to sharpen straight bladed and serrated knives, as well as any other blade that you might possess.
When it comes down to it, the sharpening systems are likely the most difficult, but most easy to use. Why this is the case? Each is unique and will have a different set of instructions. Therefore, a little bit of experimentation and practice will be required, in order to learn how to properly use your specific system. Of course, they’re also very easy to use. Why? Well, once you’ve learned how to use it, you will be able to use it repeatedly, without a second thought.

This impressive Chef’s Choice sharpener is not the only Chef’s Choice sharpener on this list. That must tell you something about its quality. I must say that I was very impressed with this sharpener. It features three stages: rough, fine, and hone. The first two stages use sharpening discs with diamond flecks as abrasives. They gently file down your blade, bringing it to a smoother, sharper point. Stage three features patented honing and polishing discs designed to straighten your blade for the sharpest, cleanest cuts possible. Its rubber feet keep it firmly planted upon your countertop for an easy and safe sharpening process.
You will never have to worry about a flat stone, if you use the ceramic sharpener, since the material is very durable and ultra-hard. There is one downside to using this type of sharpening stone and that is, it is most often not available in a coarse grade. If you are lucky enough to find a coarse grade ceramic stone, you will be disappointed, by the “glaze” build up, which will cause the stone to lose its effectiveness. Of course, it will take a while, before the “glaze” begins to build up, but it is inevitable.
As long as you keep your hand on the base, outside the rods, they do double-duty as safety rails to keep the knife edge away from your hand. It usually takes about 20 passes on each side to sharpen a blade, although you may need to repeat the process with both the medium- and fine-grit sharpening rods. Rods with very fine grit are also available, and hardcore sharpening enthusiasts like that you can flip the base over and insert the rods so they lay almost flush to the base, letting you use them like flat sharpening stones for really beat-up blades. Users also appreciate the Spyderco Sharpmaker's durability, with most saying their first model lasted for several decades of use before wearing out.
The Work Sharp WSKTS-KO performs double duty as a knife sharpener and a tool sharpener. Its ability to perform multiple tasks is part of why this sharpener looks so intimidating. Instead of using spinning discs like most electric sharpeners, this Work Sharp uses belts. In fact, it works a lot like a typical electric sander. A motor pulls the belts along so that they gently shave away at whatever you place them against.
The EdgeSelect feature means that you’re not limited to using the entire 3-stge process. It depends on what you actually need, and you have to factor in what you’re trying to cut. So if you’re going to use your knife for fibrous ingredients like venison or pumpkin, you can opt to just sharpen the knife with the 1st and 3rd stages only. This leaves the edge with a bit more bite, so that it can cut through the tough fibers more cleanly.
It is designed to help sharpen straight bladed knives that are made of steel. It cannot be used on ceramic and serrated edges. The two sharpening modes guarantee the user gets the best service from it. It has been designed with the users’ safety in mind. This is due to the large grip handle and the non-slip feet. It has an attractive design that makes it a great addition to any kitchen.

As mentioned, hand-sharpening knives is by no means an easy task to get right. It requires investment in a set of stones of varying coarseness, patience, and lots of practice. In fact, a lot of people end up damaging a knife or two while learning the process, so its good not to start training on your finest European blade. With the advent of high-quality electric options, though, that learning curve is effectively eliminated.
At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.
×