The Brød & Taylor Pocket Knife Sharpener (which is no longer available) uses the same carbide stones as the full-size model noted above, and it sharpens and hones just as well. It would make a solid, pocketable tool for campers, hunters, and anglers. But this compact model is not stable enough for long or heavy kitchen knives, and you can’t engage the spring-loaded arms in order to use a polishing function.
This Linkyo’s suction cup feet will hold it still atop any counter. Its auto-stop function will turn the machine off if you press downward with the blade or if the blade itself is too heavy. This wonderful safety feature will keep the machine from jamming and ruining your knives. Also impressive is its special catch basin which makes cleanup much easier as it catches any metal shards or shavings that come off your blade.
The AccuSharp 001 knife and tool sharpener couldn't be simpler: It's just a tiny tungsten carbide sharpening surface that you pull over the blade of a knife, with a plastic guard to protect your hand. Holding a knife with the blade up and pulling the AccuSharp across its edge can take a little getting used to, but once they've had a chance to try it, users say they love the results this inexpensive device gives.
I love this whetstone pendant!! I’ve been wearing it a couple weeks now and this thing not only performs like a champ but looks really cool. I originally left a 3 Star review like a jerk because I didn’t like the fact that my stone was all white. Idve rathered some markings but after wearing and using this thing the markings are something I could really care less about. This piece is super functional, extremely well crafted and looks great as an edc sharpening stone/necklace!! You guys rock!!
Honing is kind of like dusting the furniture while sharpening is more like reupholstering the furniture. Honing is purely a maintenance activity that should be regularly practiced to make sure the blade is clean and sharp as can be every time you use it. It’s easily done using a honing rod, a leather strop or a sharpening stone; as most stones have a side for sharpening and a side for honing. Honing is akin to trimming your hair to remove the split ends. It’s not a full on haircut. What it does is realign the tiny sharp protrusions along the edge of the blade that can be bent over with use, so that they stand more or less straight.
Note that, unlike steel honing rods, ceramic hones need occasional cleaning, as particles of knife metal build up on their surface (they form a gray layer). Idahone sells a “Superaser,” but on knife forums, many owners of ceramic hones recommend generic melamine foam sponges as a more economical alternative (the Mr. Clean Magic Eraser is the famous name-brand version). Messermeister, the maker of one of the other ceramic hones in our test, recommends a mild abrasive cleanser, like Bon Ami or Bar Keepers Friend, advice that is also echoed by many knife enthusiasts.
Then, to start sharpening, pull your knife through the "coarse" slot (made of carbide steel) and then the "fine" slot (made of ceramic). Depending how dull your knives are, it can work well in one swipe, or require multiple passes. My knives were so dull, it took about 20 passes on each side. Also, make sure to use some pressure: At first, I was too light with my swipes, but as soon as I stepped it up — magic.
Stone is awesome, stand and rubber holder are awesome. Sharpened my Benchmade griptilian with a 154CM (58-61HRC) stainless steel blade to easily shaving hair in about 10 minutes or less, on the 4000 side. Can probably get it sharper, too. Completely worth the money, and very easy to use after a few minutes of reading - don't waste any money on pre-built sharpeners - they suck.
The continuous diamond stone surface will work effectively when sharpening tools such as the scissors. You will have two types of diamond stones to choose from including the mono-crystalline and poly-crystalline. The diamond sharpening stone is preferable over other brands because they have a very flat surface, which will offer a perfect cut every time. 
Lastly, the stropping stage. Remember seeing old barber shops on television? Remember that leather paddle they used to buff the straight razor? That is stropping. The strop can be leather or canvas and it's the final step in polishing the blade, making an even surface. Depending on the use of the knife, this step may be omitted. A chef will not require the blade precision chopping vegetables that a barber requires shaving with a straight razor on a gentleman's face. The chef may simple steel the blade and keep working.
These devices work in a very similar manner as the sharpening stone. In all likelihood, you’ve probably seen a sharpening steel, at some point or another. The actual sharpening portion of the item is attached to a handle. These products are much more suitable for honing, since they don’t remove much material from the blade itself. Although it isn’t sufficient for rectifying a dull knife, it is good for honing!
Using the strength of industrial high precision superior mono-crystalline diamonds, Diamond Machining Technology (DMT) have created a durable longer-lasting flat sharpening surface that will efficiently sharpen, hone, deburr and polish almost any type of knife or cutting tool. The DMT set contains 3 one-sided whetstones that have extra-fine, fine, and coarse grits which means you have a complete sharpening system at your fingertips.
After spending more than 10 hours digging, cutting, and scooping dirt with 24 models, we found that the Wilcox 14” Garden Trowel is the best garden trowel for most gardeners. The single-piece, stainless steel Wilcox’s edge and shape penetrates the soil better than any other trowel, its wide blade scoops more soil than any soil knife, and it’s nearly indestructible.

But this is not just for pocket knives. It’s not really a good idea to get a sharpener exclusively for a pocket knife, especially when you also cook and prepare your own food, or if you also use other knives for hunting and camping. You’ll want something that’s good for all those knives, and that’s the 50264. That’s one of its most compelling features—you can use it for just about all types of knives.
Worksharp is a veteran in sharpening tools, so it shouldn’t come as a surprise that your knives will be razor-sharp after the process (sharpening and honing). And, like many users have admitted, you will become obsessed with the sharpness and will start looking for and pulling out every kind of blade in and around the house to work on. It does serious sharpening, and is worth both the money and the time spent learning how to work with the little beast.

The Brød & Taylor Professional Knife Sharpener is distinctly different from our main picks, not just in its obviously unique form but also in the way it sharpens. Whereas the others grind a new edge with rotating wheels, the Brød & Taylor model carves one with stationary tungsten-carbide stones. Some of the cheapest and worst sharpeners employ a similar method, but the Brød & Taylor’s clever design and precise construction allow it to deviate from the norm. After quickly carving an impressively keen, even edge on a dull knife, with a simple tilt of the blade you can then hone and polish the edge on those same tungsten-carbide stones, obtaining a durably sharp knife. And because this sharpener is compact and handsome, it can live on your countertop, so you’ll be more likely to keep up with regular knife maintenance. It’s the clear choice for style hounds.


This impressive Chef’s Choice sharpener is not the only Chef’s Choice sharpener on this list. That must tell you something about its quality. I must say that I was very impressed with this sharpener. It features three stages: rough, fine, and hone. The first two stages use sharpening discs with diamond flecks as abrasives. They gently file down your blade, bringing it to a smoother, sharper point. Stage three features patented honing and polishing discs designed to straighten your blade for the sharpest, cleanest cuts possible. Its rubber feet keep it firmly planted upon your countertop for an easy and safe sharpening process.
If you have invested your hard-earned money in a quality set of kitchen knives it is important that you care for them properly. Of course, you could always send them away for sharpening, but why pay money to have someone else do what you could easily do yourself? Not to mention the inconvenience of having to drive them to and from the sharpener or pay shipping and handling to send them by mail.
The final Chef’s Choice sharpener on our list is the 316 Diamond Sharpener. Like the 15XV the 316 is at its best when used to sharpen Asian-style knives and it does so with unflinching effectiveness and speed. This is a compact, 2-stage electric sharpener that produces the 15 degree edge so favored in Asian cutlery. Ideal for the preparation of sashimi or sushi.

The Work Sharp WSKTS-KO Knife and Tool Sharpener is a handheld device, which is optimized to handle various sharpening jobs. It comes with a belt sander, which spins around following a triangular configuration. It has a set of angles on either side, which can be adjusted from 15 to 30 degrees, depending on your sharpening needs. Unlike other electric knife sharpeners, which tend to overheat during high speeds, the speed of this one is adjustable.
I've always wanted to sharpen knives on water stones, and this set gave me the motivation to finally give it a shot. The price is amazing for the quality and content of the set. It comes with all the grits you need to sharpen anything... I usually start on the 400 grit if the knife is very dull, or directly on the 1000 grit if it's not too dull. The 3000 and 8000 grit stones are softer and ideal after the coarser stones. The online learning section is truly amazing, much better than I expected. A convenient place with instructional videos and many articles about knife sharpening. Only downside is that the knives are now so sharp I need to be very careful using them... but that's a good thing! I feel like I fell in love with knife sharpening again.
I recommend keeping two stones in your kit. One with a medium grit (around 800 or so) to perform major sharpening jobs, and one with a fine grit (at least 2,000) to tune the edge to a razor-sharp finish. For real pros, a stone with an ultra-fine grit (8,000 and above) will leave a mirror-like finish on your blade, but most cooks won't notice the difference in terms of cutting ability.
This water stone is specifically designed for quick sharpening of high alloy steel, stainless steel, as well as blue steel blades, which are quite difficult to sharpen using synthetic water stones. The sharpening action applied here, is similar to using a natural stone, since the surface has some elasticity, which prevents the tool from skidding. Unlike other forms of knife sharpeners, water stones are straightforward to use. You don’t need any specific set of skills.
With our sharpeners in hand, we went about putting them to work—meaning we needed a lot of dull knives. Those are in short supply in the Wirecutter test kitchen (Lesley keeps ’em sharp), so we borrowed some from coworkers and sacrificed a few of the test kitchen’s blades. To ensure truly, appallingly dull blades, we ground their edges repeatedly against a piece of concrete curbstone.
Meanwhile, if you want something that you can use to sharpen a variety of knives and edges, including small and pointed tools, you might want to consider the DMT WM8CX-WB 8-Inch Duo Sharp Plus Bench Stone – Coarse/Extra Coarse with Base. For less than a hundred bucks, you can even use it to repair a damaged edge because of its extra-coarse diamonds.
This is a great value for those who want a complete set of Shapton stones- from fine to coarse grit. The Shapton glass stone is the essential sharpening tool for any professional or home cook serious about knife care. A synthetic stone with a high degree of uniform abrasion, the Shapton needs no soaking. Compared to other synthetic stones, it creates an edge faster and doesn't wear down as quickly. So the Shapton glass stone makes shaping your knife easier and more convenient. And even when the abrasive surface becomes paper-thin, this stone still performs, thanks to its sturdy glass backing plate. Shapton glass stones are also engineered to produce no odor, unlike regular whetstones, which can leave an unpalatable odor on knives unless they're carefully cleaned. This is a distinct advantage for cooks who need to quickly shape their knives in the heat of service. The Shapton HR (High Resistance) glass stone series is suitable for both stain-resistant and carbon steel knives. Use the #500 to create a new, rough edge or fix small chips, the #2000 to create a cutting edge and the #16000 to polish and smooth out the edge.
Lastly, the stropping stage. Remember seeing old barber shops on television? Remember that leather paddle they used to buff the straight razor? That is stropping. The strop can be leather or canvas and it's the final step in polishing the blade, making an even surface. Depending on the use of the knife, this step may be omitted. A chef will not require the blade precision chopping vegetables that a barber requires shaving with a straight razor on a gentleman's face. The chef may simple steel the blade and keep working.
Once you’ve confirmed that you have a dull blade, it is time to begin finding a sharpener. This process isn’t entirely easy. There is an assortment of different sharpening tools, such as sharpening stones, sharpening steels and even electric knife sharpeners. Although each of these serves an identical purpose, they’re tremendously unique. Which is best for you? It is vital to inspect each individual type, in order to get a better understanding of each unique type. This information will be provided below.
Over the course of two days I re-sharpened nearly a dozen old blades, including removing the secondary bevel on an old stainless Ontario saber-grind Navy diver's knife, convexing the edge on flat ground 1095 Schrade 55 that also came with a secondary bevel, and fixing a broken tip on an old Kershaw folder. These stones made quick work of the Schrade and Kershaw. Both had completely new edge geometry within 30 minutes apiece. The Kershaw looked like-new, as if the tip had never broken. And the Schrade cut much better than it's secondary bevel would previously allow, regardless of how sharp I got it with a ceramic rod and strops. The Ontario took a little more work, as it had been abused a little the last time I'd held it, over 25 years ago and was as dull as a case knife - one of the reasons I decided to go ahead and do a full saber grind - well, a slightly convexed saber, I suppose would be more accurate. But within under an hour of using the two stones and a couple leather strops (one with black compound, another with green), the Ontario was shaving sharp again too.
The following are my personal favourites and they are all synthetic stones, I do have experience with natural what stones but lets keep it simple, lets stick to synthetic water stones. Believe me, some of the world sharpest knives are sharpened solely on synthetic stones. Here are my personal favourites, I use these water stones every day and the order is not necessarily in priority, they are all good.
Only 2 pairs of pulls are needed on Stage 3 to create a sharp edge that can tackle the majority of your food preparation needs. If you’re looking for a few extra fancy points with gourmet preparation, then give the blade a couple more pulls on Stage 3. Go ahead, pluck that hair and with dramatic flourish, slice it in midair, that’s how sharp your knife is now!
The company is to be commended for including links to instructional videos in the package. Those videos lay out clearly how to get the most from your Whetstone sharpener stone. Once you get up to speed you’ll likely enjoy the process and at the same time achieve professional quality results time and again. Sure, it’s not fancy and doesn’t have a sleek, chrome plated design but it works.

The Idahone stood out on a couple of fine details, too: Its ergonomic maple wood handle was more comfortable than the synthetic handles on the rest of the competitors, and its hanging ring is amply sized and sturdily made of steel. The other ceramic rods we tested had smaller hanging rings, plastic rings, or no hanging ring at all. Hanging a ceramic rod is a good idea, because the material is somewhat brittle and can chip or break if it gets jostled around in a drawer or utensil holder.
The base has several slots set at different angles. Changing slots lets you adjust the Spyderco Sharpmaker for kitchen knives with a 15- or 20-degree edge, and users say it excels at sharpening scissors and utility knives too. "There isn't much the Spyderco can't sharpen," writes Scott Gilbertson for Wired, explaining that the open design makes it easy to do unusual things like de-burring a Phillips head screwdriver or sharpening wire cutters. You can also use the Spyderco Sharpmaker to sharpen serrated blades.
Whether they were professional testers or home users, reviewers sometimes found it a bit unnerving to pull the AccuSharp over an exposed knife blade with nothing but its plastic guard as protection. Once they got past that, though, they found it produced a sharp edge quickly and easily. Workers in a prominent test kitchen found it especially handy for quick touch-ups, since it's small and light enough to fit in a drawer.
The Lansky sharpening system is by far one of the best sharpeners for hunting pocket and survival knives on today’s market. It consists of 5 ceramic hones, which range from extra-coarse to extra fine grades. This will allow you to cover all levels of coarseness, so you can get a very fine edge. The stones are also color coded to eliminate mishaps and they are equipped with built-in finger grooves, which will increase safeness and decrease the risk of getting slashed.
Many households can benefit tremendously, by owning an electric knife sharpener. Typically, these sharpeners are slightly expensive, but this isn’t the case with the Presto 08800. This particular sharpener is actually very affordable! It only weighs around 3 pounds, so it’s much lighter than other electric models. Many people will find this extremely beneficial, since it’ll allow them to transport the device and easily store it somewhere out of the way.
The Sharpening and Specialty lines of waterstones from Naniwa are available in several packages of three to five stones. The Specialty line is the same as the Sharpening line, but half the thickness and therefore less expensive. Both the Sharpening and the Specialty stones are 8 1/4" long by 2 3/4" wide, amply sized for most knives and tools. These are a higher grade stone that do not require soaking before use. While you would need a flattening stone in addition, these kits are a good way to enter into premium grade waterstones.
The knives sharpening system is multifunctional. It has three slots for ceramic knives, dull metal knives and a slot for finishing and polishing the edges. It is very safe to use. Hence, no need to worry about accidents or to damage your blades in the process of sharpening. The base is non-slip in nature due to the heavy duty non-slip rubber used. This provides extra grip thus boosting its safety. The main body is light and yet durable at the same time.
Overall, users say the Sharpmaker offers reliable, hard-to-beat results with a reasonable learning curve, and they're happy that, unlike traditional flat stones, you don't have to wet or oil the sharpening rods before use. They also say the Sharpmaker makes it easier to maintain a good angle than flat sharpening stones. Users warn that you do, however, need to scrub the stones periodically with an abrasive cleanser like Comet or Ajax to remove any lingering particles of steel. They also warn to be careful about not dragging the point of the knife across the stones as this will quickly dull it.
Well, I got one for myself and one for my mother. The next day after my mother received it, my sister told me that they just sharpened some knives with it and wow, what a great tool. Well, the same day at a later time, the same sister sent me a picture with her bleeding finger that she had just cut with one of the knives. So yup, this little thing will get things sharp! One thing to take in consideration is that it will "eat" a lot of steel as it sharpens. I made the mistake of sharpening this chef knife (good thing it was a cheap one) always starting a little far from the end and now I have a little arch in it that will not reach the cutting board to chop onions, for example. But that's me lacking common sense, the sharpener is awesome!
Why spend hundreds of dollars on a knife sharpening machine when you can get your knives razor sharp for the price of a cheap necktie? It won’t take more than a few practice sessions to learn how to get your knives professionally sharp with the Lansky 8” Ceramic Sharp Stick. This device is simplicity incarnate and yet it does the job of electric sharpeners costing many times more.
I give Sharp Pebble a top rating for two reasons. First, the company emailed a user guide for me to review and learn how to best use its product while it was being shipped to me. Wonderfully proactive. Second, the sharpening stone did a terrific job restoring the edge on my kitchen knives that had been woefully neglected. Ever rent a house and every knife in the kitchen has the edge of a butter knife? I was almost there. Now, the knives are cutting beautifully. I have only one suggestion for Sharp Pebble. While the stone includes a useful angle guide that can be attached to a blade and the guide gives clear steps on prepping the stone and how to hold the blade when sharpening, it does not illustrate the manner in which the blade needs to be moved across the stone. I had to go to Youtube to get some tips on the exact method. I have historically been very bad at putting an edge on a blade due to ignorance primarily. But with the help of the video and a good stone, I did an effective job. The base does a great job of holding the stone in place and is attractive in the kitchen.
“I have many European and Asian knives. This is the first and (only) sharpener that sharpens them all — and does it better. Before I would never trust any electric sharpener to handle my custom Asian, Global one-sided and handmade fillet knives. This works. It makes short work of the European Henckels of the ’60s and ’70s (better than new). I had held off for the cost and wasted a few years with my stones. I doubt any knife person could be disappointed.”
This is the interior set up of the Wicked Edge hard case. The Wicked Edge is actually upside down in the case with the base on top and the center vice going down into the foam of the case. Notice how well different stones are laid out in the case so you can arrange them in the order you want to make the sharpening progression easier. The different components also have specific cut-outs and the white box off the bottom left hand side is for the angle cube. In the top left there is a small spot for random stuff like a spare battery for the angle cube (trust me get a spare).
Grit choices should fall in line with the steel used to make the knives you plan to sharpen. If your knives are all European, relatively soft steel knives, then you could finish off your knives at the 1,000 – 2,000 grit level. There is a lengthy explanation regarding this topic but suffice it to say that at 2,000 grit, these knives can be made extremely sharp.
Amazon has replacement belts that can fine fine hone blade to razor. Even a diamond belt for ceramic knifes. I have razor sharp axe and hatchets now, had them for 20yrs and wish i did this a long time ago. Lawnmower blades can be sharpened w/out taking off lawnmower. Grass cuts clean and yard is amazing,, really never thought a sharp lawnmower blade would make such a difference. Old butcher block kitchen knife set is better than new now. Steak slices like butter. Yes I am a big fan, and don't think you need the variable speed unit,, this base model works fast, and does the job. did i mention scissors, hunting knife going thru deer skin like a scalpel, .... get it.. stop lookin'.

You've likely seen someone using a honing rod to "sharpen" a knife. But the steel rod doesn't actually sharpen your knife—it just straightens out the cutting edge on the blade to allow for smoother, safer cuts. Sharpening your knife, on the other hand, actually, well, sharpens it. So yes, you need to do both. Hone your knife weekly—every time you use your knife, if you'd like—and sharpen your knife every few months, or at least every year (depending on how often you use it, and how soon you notice dulling that honing doesn't really improve).


This tiny, retractable rod has actually been designed for light sharpening and honing all in one step. Based on its size, I believe that this rod is best used by those who are uncomfortable flinging long knives and rods around as they attempt to put a finer edge on their blades. Its compact nature also makes it perfect for those who need to bring it with them on the go.
If you’ve only used rods and manual handheld sharpeners all your life, expect a learning curve. While there are guides to help you get the exact angles, it’s still very easy to get your blades scratched, or even worse, come out with a damaged edge, especially when you use the coarse ring. We recommend starting with your cheapest knives until you’ve gotten used to the work.
One of the main advantages of choosing this stone sharpener over others, is the ease of use, efficiency and consistency. It might take a while before you can properly sharpen with a wet stone. However, the Chosera 1,000, makes the whole process easy and fast. There are no complicated processes. All you have to do is push and pull your blade across the surface and you are good to go. You obtain a razor-sharp edge. In short, everyone can do it.
Although it is slightly expensive than other tool sharpeners, this one saves you quite some precious time. It is one of the fastest ways to get all your blades sharpened. In addition, you just need to spend a few hours with it, and you will learn its entire operational procedure. Avoid excessive sharpening, since it might leave scratches on the blade’s surface.
Cost – While you can get a perfectly serviceable sharpening stick or stone sharpener for short money and some very high-quality tabletop manual 2 and 3-stage sharpeners for less than $50, high-quality mechanical systems will often run you $200 or even more. While that’s not so much money it’s likely to impact the quality of your life it is a lot to pay to keep a decent edge on your knives. While how much you ultimately pay for a sharpener is entirely up to you, you may want to consider your commitment to cooking and how often you are actually liable to use the device. If this is your first sharpener you might also want to consider learning how to sharpen a blade using a classic stick or stone sharpener first, before deciding if moving up to a mechanical sharpener is the right thing for you.
A pull-through knife sharpener is easy to use and definitely a good option for those who want sharp knives, if convenience and speed are a high priority with sharpening. The true ‘razor edge freaks’ will have to take a look Japanese water stones. These enable you to put the ultimate razor edge on any blade. However, they do demand some technique and practice at first. Of all the knife sharpeners which we tested, the Minosharp Plus 3 is an absolute winner. With it’s ceramic wheels it gradually transforms your knife in three phases, from blunt to nice and sharp. This is done within a very acceptable time frame. If speed is most important to you of all qualities a pull-through sharpener can have, we will advise you to choose the Vulkanus.
Removing the burr is fairly simple. You'll need a leather strop or block (this sort of thing), which is designed to catch the metal fibres from the knife. You could do it with a fibrous tea towel or some newspaper if you like, but I'd suggest going with leather to begin with. The motion is fairly similar to sharpening. Draw the knife over the leather, going away from the edge at roughly the same angle as when you sharpened. 
Though "whetstone" is often mistaken as a reference to the water sometimes used to lubricate such stones, the term is based on the word "whet", which means to sharpen a blade,[1][2] not on the word "wet". The verb nowadays usually used to describe the process of using a sharpening stone is to sharpen, but the older term to whet is still sometimes used. The term to stone is so rare in this sense that it is no longer mentioned in for example the Oxford Living Dictionaries.[3][4] One of the most common mistaken idioms in English involves the phrase "to whet your appetite", too often mistakenly written as "to wet". But to "whet" quite appropriately means "to sharpen" one's appetite, not to douse it with water.
×