While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
There will be a drawer that extends into the mechanism under the abrasives. Any detritus from the sharpening process drops into this drawer. Exactly where the drawer is located will differ from sharpener to sharpener but it shouldn’t be hard to find. Remove the drawer flick any material into the wastebasket and then wipe out the drawer with a damp cloth or tissue. You may want to use work gloves and goggles to protect your hands and eyes from any loose metal shavings. Once the drawer is clean and dry replace it. The exact means by which the sharpening mechanism itself is cleaned will vary from manufacturer to manufacturer. Consult your owners guide for specific details. Make sure you don’t introduce any grease or other lubricants into the sharpener unless specifically directed to do so by the owner’s manual. Also, the outside of the sharpener should come perfectly clean with just a damp cloth. Avoid using commercial cleaners or abrasives of any kind.
I've been using these stones for the past day, and they work great. Once you get the technique down that works for you, you can sharpen any knife to the point it can cut through news paper. Tip: make sure you count the amount of times you pass through the stone on one side and do that same amount on the other side. What I usually do is if I know the knife is very dull or chipped, I do 100 passes on each side using the 400 grit. I test the blade on thick paper and if it cuts through I test it on news paper. If it doesn't cut through the news paper I do another 50 passes on each side. Repeat this until the blade can cut through newspaper. After, on the 1000,3000, and then the 8000 grit stone I do 50 passes on each side. This should make the blade very smoothe cutting and polish it. I plan on getting a strop or piece of leather to further polish the blade. The only thing I don't like about this is that this package is that it does not come with a dressing stone so you can re flatten/level the stone after using them.
Learning sharpening technique requires focus even without worrying about the stone itself. Stones that require frequent flattening, soaking and cleaning, or that take a long time to create an edge can be a source of frustration to some beginning sharpeners. Keep in mind your willingness perform regular maintenance when choosing a starting set of stones.
Your primary goal is just to improve the edge, make it a little bit sharper. Manage you’re expectations and don’t worry about getting the knife ready for eye surgery on day one. Ignore all those YouTube videos where you see folks performing miracles with their knives, forget that completely. You just want to make the knife a little less dull and by doing so you will achieve what most people will never even attempt. You want to get a taste of sharpening success and it can happen quickly. If you are reading this, or any other cool sharpening tips, you’re on the right path.
A: That depends almost entirely on how often you use them. If you are a professional chef who uses his or her knives every day then you should hone them every time you use your knives. But honing has its limits and over time your edge is going to become dull no matter what. Therefore your knives will need to be sharpened at least several times a year. Some chefs, in fact, will use a whetstone on an almost daily basis in order to ensure their knives are always razor sharp. Most of us, however, are not professional chefs and may not even touch our kitchen knives for days at a time. In that case, it’s probably a good idea to hone the edge after every couple of uses and have your knives sharpened once a year.